Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
← Back

Study guide · Chapter 2 of 7

Standards & Regulations Study Guide — Rigger Level I (NCCCO)

19 free practice questions

Standards questions ask which rulebook covers a piece of gear, what its marking must say, and which shop habits the rules forbid. Two families matter: the ASME B30 consensus volumes, split by type of equipment, and the OSHA regulations, split into general industry (Part 1910) and construction (Part 1926). Learn which document owns which item, because the stem usually names one.

Key takeaways

  • B30.9 covers slings, B30.10 hooks, B30.20 below-the-hook devices, B30.26 rigging hardware and B30.5 the mobile crane itself.
  • OSHA 1926.251 governs construction rigging and 1910.184 governs slings in general industry.
  • The rated load on the item's own identification is the limit, and missing or unreadable identification takes the item out of use.
  • Job or shop hooks and links on alloy chain, knots in place of splices and makeshift shortening are prohibited, and custom lifting accessories are proof tested to 125 percent.
  • Hoisting people is a last resort, limited to 50 percent of rated capacity with a 125 percent, five-minute proof test at each jobsite.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1Which ASME B30 volume covers what1 min
  2. 2The OSHA rigging rules: 1926.251 and 1910.1841 min
  3. 3What the identification must show1 min
  4. 4Makeshift gear and practices the rules forbid1 min
  5. 5Hoisting people under OSHA 1926.14311 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.251: Rigging equipment for material handling, OSHA 29 CFR 1910.184: Slings, OSHA 29 CFR 1926.1431: Hoisting personnel

Rigger Level I (NCCCO) cheat sheet: every key fact on one page →Next chapter: Sling Inspection & Removal →

Practice questions built from the published NCCCO Rigger Level I written examination outline and the consensus rigging practices of the ASME B30 series and the OSHA rigging regulations. CCO and NCCCO are marks of the National Commission for the Certification of Crane Operators; this site is not affiliated with or endorsed by NCCCO. This bank covers the WRITTEN examination only — Rigger Level I certification also requires a hands-on practical examination that no multiple-choice question can prepare you for, and there is no substitute for supervised practice with real gear. Capacity always comes from the identification tag and the manufacturer's rating for the specific sling, shackle or device in your hands, never from a practice question. Confirm current requirements with NCCCO before testing. Official exam outline →