Chapters0/30 ▾
Chapter 2 · Lesson 5 of 5
Hoisting people under OSHA 1926.1431
1 min read
Cranes are built to lift material, so OSHA treats hoisting workers in a personnel platform as a last resort. It is allowed only where conventional means of reaching the work, such as a personnel hoist, ladder, scaffold or aerial lift, would be more hazardous or are not possible because of the structure or site conditions.
Saving time or avoiding the cost of a scaffold does not qualify, and neither does having a rated platform and a signal person in place.
Two numbers carry most of the questions. First, the total of platform, occupants, tools, materials, rigging, hook and load line must not exceed 50 percent of the crane's rated capacity for the radius and configuration in use.
Second, at each jobsite, and after any repair or modification, the platform and rigging are proof tested with 125 percent of the platform's rated capacity, spread evenly and held suspended for five minutes.
Example: if the chart allows 9,000 lb at the working radius, the whole personnel lift may total no more than 4,500 lb; a platform rated 1,200 lb is proof tested with 1,500 lb. Note the two different bases: the 50 percent limit is figured on the crane's capacity, the 125 percent test on the platform's.
Check yourself
1. A personnel platform with its occupants, their tools, and the rigging is to be hoisted under OSHA 29 CFR 1926.1431. What limit applies to that total load?
2. Under OSHA 29 CFR 1926.1431, when may employees be hoisted in a personnel platform by equipment covered by the construction crane standard?
Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.251: Rigging equipment for material handling, OSHA 29 CFR 1910.184: Slings, OSHA 29 CFR 1926.1431: Hoisting personnel
Rigger Level I (NCCCO) cheat sheet: every key fact on one page →