Chapters0/30 ▾
Chapter 1 · Lesson 2 of 4
Center of gravity and attachment points
1 min read
The center of gravity sits toward the heavy end of a load, not at its geometric middle.
A skid with a pump at one end and light cabinets at the other has its center of gravity toward the pump, so the pick points must straddle that spot and the hook must end up over it. Attachment points placed above the center of gravity let the load hang stable and return to level if disturbed; points below it let the load roll over as soon as it is free.
Attachment points must be built for lifting: lugs, padeyes or lifting eyes shown on the drawing or provided by the manufacturer. Handrails, piping, conduit and access framing were designed for other jobs and can tear out. The assessment also looks at the load's character:
- Loose or liquid contents can shift in flight and move the center of gravity, so they are secured first.
- Long, flexible loads need more support points or a below-the-hook device so they do not fold.
- Anchor bolts, shims, grout and piping must be released so the load lifts free.
- Markings such as orientation arrows or do not tip drive the rigging plan.
Example: a fan skid has its motor at one end, so the rigger places the pick points so the motor end sits inside them and plans to center the hook toward that end, not over the middle of the frame.
Check yourself
1. Why should the attachment points selected for a load be above the load's center of gravity?
2. A rigger is choosing where to attach slings on a packaged unit. Which of these is an unsuitable attachment point?
Facts checked 2026-11-15 · Sources: NCCCO: Rigger Level I written exam outline, OSHA 29 CFR 1926.251: Rigging equipment for material handling, OSHA 29 CFR 1910.184: Slings
Rigger Level I (NCCCO) cheat sheet: every key fact on one page →