Chapters0/30 ▾
Study guide · Chapter 4 of 7
Hardware & Device Inspection Study Guide — Rigger Level I (NCCCO)
20 free practice questions
Hardware inspection questions name a hook, shackle, eyebolt, turnbuckle or lifting device and ask whether the condition described takes it out of service. Most answers come from ASME B30.10 for hooks, B30.26 for rigging hardware and B30.20 for below-the-hook devices, with OSHA numbers mixed in. The pattern to learn: permanent distortion, cracks, heat damage, unauthorized repairs and missing markings all end the item's use.
Key takeaways
- Under ASME B30.10 a hook comes out at a 5 percent throat increase capped at 1/4 in, any visible twist, or more than 10 percent wear in the bowl.
- OSHA 1910.184 uses 15 percent throat opening at the narrowest point and 10 degrees of twist, so read which document the question names.
- A shackle with a substitute bolt, a crack, more than 10 percent wear or a pin that will not seat is out of service.
- Illegible markings, arc strikes, weld spatter and unauthorized welding are removal conditions for all rigging hardware.
- Below-the-hook devices show their rated load on the structure or an attached tag, and custom lifting accessories are proof tested to 125 percent.
Lessons in this chapter
4 short lessons · 4 min read
- 1Hook removal criteria1 min
- 2Inspecting shackles and their pins1 min
- 3Eyebolts, hoist rings, links and turnbuckles1 min
- 4Lifting devices, blocks and who inspects1 min
Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.251: Rigging equipment for material handling, OSHA 29 CFR 1910.184: Slings, NCCCO: Rigger Level I written exam outline
Rigger Level I (NCCCO) cheat sheet: every key fact on one page →Next chapter: Slings & Hitches →Practice questions built from the published NCCCO Rigger Level I written examination outline and the consensus rigging practices of the ASME B30 series and the OSHA rigging regulations. CCO and NCCCO are marks of the National Commission for the Certification of Crane Operators; this site is not affiliated with or endorsed by NCCCO. This bank covers the WRITTEN examination only — Rigger Level I certification also requires a hands-on practical examination that no multiple-choice question can prepare you for, and there is no substitute for supervised practice with real gear. Capacity always comes from the identification tag and the manufacturer's rating for the specific sling, shackle or device in your hands, never from a practice question. Confirm current requirements with NCCCO before testing. Official exam outline →