Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
← Rigging Hardware & Lifting Devices

Chapter 6 · Lesson 1 of 4

Using shackles correctly

1 min read

A shackle carries its rating through the bow; the pin is the closure. A single sling eye sits centered in the bow, and two legs both go in the bow, not spread along the pin, with an included angle of no more than 120 degrees, because a wider angle tries to spread the body.

In a choker, the pin goes through the choking eye so the moving sling body rides in the bow; a sling running against the pin can rotate and unscrew a screw pin.

For a shackle left in place for weeks, or anywhere a sling can turn, choose a bolt-type shackle with nut and cotter pin. A screw-pin shackle relies on thread friction alone, so it is never rigged where load movement could back the pin out.

Side loading is any pull off the shackle's in-line axis. A typical manufacturer's chart, such as Crosby's for screw pin and bolt type shackles, steps the reduction up with the angle, reaching 30 percent at 45 degrees and 50 percent at 90 degrees, and round pin shackles are not side loaded at all.

Where a table lists reductions, subtract. Example: a shackle marked 12 tons pulled 45 degrees off line keeps 12 x 0.70 = 8.4 tons; pulled 90 degrees off line it keeps 12 x 0.50 = 6 tons. Always follow the chart for the specific shackle.

Check yourself

1. A shackle is marked with a rated load of 10 tons and will be loaded 45 degrees off its in-line axis. Applying the manufacturer's side-loading chart, which reduces the rating 30 percent at 45 degrees, what load may the shackle take?

2. A shackle will remain installed on a lifting lug for several weeks, and the sling attached to it can rotate as loads are handled. Which shackle should be selected?

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.251: Rigging equipment for material handling, NCCCO: Rigger Level I written exam outline, The Crosby Group: rigging hardware product and warnings information

Rigger Level I (NCCCO) cheat sheet: every key fact on one page →