Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
← Sling Inspection & Removal

Chapter 3 · Lesson 4 of 4

Web slings, roundslings and fiber rope

1 min read

Synthetic slings fail from heat, cuts and damage to their stitching. OSHA 1910.184 lists acid or caustic burns, melting or charring, snags, punctures, tears or cuts, broken or worn stitches and distorted fittings as removal conditions for web slings.

Stitching in a load-bearing splice is the load path itself, and under ASME B30.9 those splices may never be repaired; other web sling repairs are made only by the manufacturer or a qualified person and then proof tested to twice the rated load.

A knot anywhere in a web sling is a removal condition. ASME sets the nylon and polyester limit at 194 degrees F (90 C); OSHA's is 180 degrees F, with 200 degrees F for polypropylene.

A roundsling's cover is a wear indicator, not a load part. Example: a clean cut shows the core yarns underneath, and they look fine. The sling still comes out, because once the core is exposed its condition cannot be verified.

For natural fiber rope, OSHA's construction rule lists abnormal wear, powdered fiber between the strands, broken or cut fibers, uneven strands, discoloration or rot, and distorted hardware.

Check yourself

1. A polyester roundsling has a clean cut through the outer cover, and the core yarns underneath are visible but look undamaged. Under ASME B30.9, what is the correct action?

2. A synthetic web sling has broken stitching in a load-bearing splice. Under ASME B30.9, what may be done with that sling?

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1910.184: Slings, OSHA 29 CFR 1926.251: Rigging equipment for material handling, NCCCO: Rigger Level I written exam outline

Rigger Level I (NCCCO) cheat sheet: every key fact on one page →