Chapters0/30 ▾
Chapter 2 · Lesson 3 of 5
What the identification must show
1 min read
Identification lets the rigger size the pick from the item in hand. The exam asks what each kind of gear must carry, and the lists differ by item:
- Slings under B30.9: the maker's name or trademark, the rated load for each hitch it is rated in, and its size, with the number of legs where there is more than one.
- Alloy chain slings under OSHA 1910.184: size, grade, rated capacity and reach.
- Hardware under B30.26: the maker's name or trademark and the rated load.
- Below-the-hook devices under B30.20: rated load, the device's own weight if over 100 lb (45 kg) and the maker's identification.
The device weight matters because it hangs on the hook with the load. Example: a 900 lb spreader under a 6,000 lb load puts 6,900 lb on the hook before slings and shackles are added.
A sling whose tag has worn unreadable comes out of use, and only the manufacturer or a qualified person may restore its identification; copying figures from a sling that looks the same is not allowed, and on a roundsling the color is a convenience, not a capacity.
Breaking strength and design factor are design data, not working figures, and loading to them would put the sling far above its rated load.
Check yourself
1. Under OSHA 29 CFR 1910.184, what must the permanent, durable identification on an alloy steel chain sling state?
2. Under ASME B30.9, what must a sling's identification convey to the user?
Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.251: Rigging equipment for material handling, OSHA 29 CFR 1910.184: Slings, OSHA 29 CFR 1926.1431: Hoisting personnel
Rigger Level I (NCCCO) cheat sheet: every key fact on one page →