Chapters0/30 ▾
Study guide · Chapter 3 of 7
Sling Inspection & Removal Study Guide — Rigger Level I (NCCCO)
20 free practice questions
Sling inspection questions ask who inspects, how often, and the exact point at which a sling must come out of service. Many of the numbers differ between ASME B30.9 and OSHA 1910.184, so the document named in the stem decides the answer. Learn the pairs together, and remember that removal means the sling physically leaves the work area.
Key takeaways
- Construction rigging is inspected before use on each shift, and under both 1926.251 and 1910.184 a competent person inspects slings each day before use.
- A designated person inspects and reports, but only a qualified person decides whether a deficiency is a hazard.
- Wire rope comes out at ten random broken wires in one lay or five in one strand in one lay.
- Heat limits differ by material and by document: 180 degrees F (ASME) or 200 degrees F (OSHA) for fiber core rope, 194 degrees F (ASME) or 180 degrees F (OSHA) for nylon and polyester, 1,000 degrees F for alloy chain.
- Exposed roundsling core yarns, knots in web, and damaged load-bearing splices retire a synthetic sling.
Lessons in this chapter
4 short lessons · 4 min read
- 1Who inspects slings, and how often1 min
- 2Wire rope slings: broken wires, wear and heat1 min
- 3Chain, metal mesh and sling hooks1 min
- 4Web slings, roundslings and fiber rope1 min
Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1910.184: Slings, OSHA 29 CFR 1926.251: Rigging equipment for material handling, NCCCO: Rigger Level I written exam outline
Rigger Level I (NCCCO) cheat sheet: every key fact on one page →Next chapter: Hardware & Device Inspection →Practice questions built from the published NCCCO Rigger Level I written examination outline and the consensus rigging practices of the ASME B30 series and the OSHA rigging regulations. CCO and NCCCO are marks of the National Commission for the Certification of Crane Operators; this site is not affiliated with or endorsed by NCCCO. This bank covers the WRITTEN examination only — Rigger Level I certification also requires a hands-on practical examination that no multiple-choice question can prepare you for, and there is no substitute for supervised practice with real gear. Capacity always comes from the identification tag and the manufacturer's rating for the specific sling, shackle or device in your hands, never from a practice question. Confirm current requirements with NCCCO before testing. Official exam outline →