Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
← Rigging Hardware & Lifting Devices

Chapter 6 · Lesson 3 of 4

Turnbuckles, swivels, blocks and hoists

1 min read

  • Turnbuckles carry their rating only with both end fittings fully threaded into the body. Pipe-body styles hide the threads, so engagement is checked before loading. Load in line and in tension, lock the body against unscrewing, and turn it with a wrench on the flats, not a bar through the body.
  • Swivels come in two kinds: bearing swivels built to turn under load, and positioning swivels meant only to take twist out before the load comes on. How easily it spins does not decide which one you have.
  • Blocks: the rope must sit in the sheave groove and the block must line up with the pull. The load on the block is the line load times the block load factor for the angle between the lines.

Hoists have their own rules. The lever on a lever hoist is sized so one person's normal effort produces about the rated load, so the lever is part of the overload protection.

If it will not move the load, stop and check the weight and rigging; a second person or a pipe over the lever can overload the hoist, its chain or the anchor.

On a chain hoist, the load chain is not a sling. Example: to lift a pump, put a rated sling on the pump and hook the hoist to the sling, with the load chain hanging straight and untwisted; never wrap the load chain around the pump and hook it back on itself.

Check yourself

1. A lever (ratchet) puller will not move the load with normal hand effort on its lever. What is the correct action?

2. A turnbuckle is used as adjustable hardware in a rigging assembly. Which practice is correct?

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.251: Rigging equipment for material handling, NCCCO: Rigger Level I written exam outline, The Crosby Group: rigging hardware product and warnings information

Rigger Level I (NCCCO) cheat sheet: every key fact on one page →