Chapters0/30 ▾
Chapter 5 · Lesson 1 of 4
Matching the sling type to the load
1 min read
Each sling family has strengths, and the exam gives you a load and asks which family fits. Think about what will damage the sling first, then what the sling might do to the load. Chain, bare wire rope and metal mesh are steel on steel and will mark a polished surface.
| Load or setting | Best fit | Why |
|---|---|---|
| Hot surfaces, sharp unfinished edges | Alloy chain | Not cut like fiber, keeps strength where synthetics melt |
| Rough, abrasive bar stock | Metal mesh | Wears slowly and conforms to the load |
| Polished or painted finish | Synthetic roundsling or web | Soft body spreads the bearing area |
| Heat beyond a fiber core rope's tag | A sling rated for that heat | The core degrades unseen |
Natural fiber rope is a poor pick for wet or chemical service: moisture brings rot, chemicals cut and powder the fibers, and the damage often shows only when the strands are opened. Fiber rope slings also may not be repaired, so a damaged one is scrapped.
A roundsling cover is a wear indicator, not armor, so it is not the answer for abrasive loads. Example: a crew moves a hot, freshly cut steel plate with burred edges. Chain is the choice, and a nylon web sling, however soft, is the first thing that would fail.
Check yourself
1. A steel weldment with hot surfaces and sharp, unfinished edges must be moved out of a fabrication bay. Which sling is the best selection?
2. A mill handles bar stock whose rough, abrasive surfaces cut through web slings quickly. Which sling is best suited to that service?
Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1910.184: Slings, OSHA 29 CFR 1926.251: Rigging equipment for material handling, NCCCO: Rigger Level I written exam outline
Rigger Level I (NCCCO) cheat sheet: every key fact on one page →