Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
← Back

Study guide · Chapter 7 of 7

Load Control & Completing the Lift Study Guide — Rigger Level I (NCCCO)

19 free practice questions

Load control questions follow the lift from start to finish: finding the center of gravity, working out the tension in each sling leg, keeping the load from swinging or spinning, and landing it so the slings come out safely. Expect two or three calculations with the angle factor given in the stem. The rest test the order of steps and where people stand.

Key takeaways

  • A suspended load always settles with its center of gravity directly under the hook.
  • Leg tension equals the weight divided by the number of legs, times the load angle factor.
  • Sling angles under 30 degrees from horizontal are not used without approval from the sling maker or a qualified person.
  • Lift a few inches, stop and check, and land and re-rig if the load does not hang level.
  • Land on blocking that carries the load and leaves room to pull the slings by hand, and never drag a sling from under a resting load.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1Finding and using the center of gravity1 min
  2. 2Sling angles and leg tension1 min
  3. 3Tag lines and rope knots1 min
  4. 4A smooth start and the trial lift1 min
  5. 5Landing the load and finishing the lift1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1910.184: Slings, OSHA 29 CFR 1926.1425: Keeping clear of the load, NCCCO: Rigger Level I written exam outline

Rigger Level I (NCCCO) cheat sheet: every key fact on one page →

Practice questions built from the published NCCCO Rigger Level I written examination outline and the consensus rigging practices of the ASME B30 series and the OSHA rigging regulations. CCO and NCCCO are marks of the National Commission for the Certification of Crane Operators; this site is not affiliated with or endorsed by NCCCO. This bank covers the WRITTEN examination only — Rigger Level I certification also requires a hands-on practical examination that no multiple-choice question can prepare you for, and there is no substitute for supervised practice with real gear. Capacity always comes from the identification tag and the manufacturer's rating for the specific sling, shackle or device in your hands, never from a practice question. Confirm current requirements with NCCCO before testing. Official exam outline →