Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
← Standards & Regulations

Chapter 2 · Lesson 2 of 5

The OSHA rigging rules: 1926.251 and 1910.184

1 min read

OSHA's regulations are law, not consensus. Part 1926 is the construction standard, and section 1926.251 covers rigging equipment for material handling on construction work: slings, shackles, hooks, wire rope and their fittings. Part 1910 is general industry, and section 1910.184 covers slings used with other material handling equipment, including alloy chain, wire rope, metal mesh, fiber rope and synthetic web.

So the first question on a regulation item is which side of the fence the job is on. A sling in a factory falls under 1910.184; the same sling on a building site falls under 1926.251. Section 1926.1431 is different again: it covers hoisting people in personnel platforms, not ordinary material rigging.

Both rules tie the working limit to the safe working load shown on the equipment's own permanent identification, and forbid loading above it or using gear without it. Past performance proves nothing, because a sling can be damaged internally without showing it, and a big shackle elsewhere in the rig does not raise the sling's rating.

When the manufacturer's figure is lower than a crew's rule of thumb, the manufacturer's figure governs. A rule of thumb is a teaching aid for the general case; the maker's number reflects that sling's actual construction and fittings.

Check yourself

1. Under OSHA's rigging rules, what sets the maximum load that may be placed on a sling or other item of rigging equipment?

2. A sling manufacturer's instructions give a lower rated load for a hitch than a rule of thumb the crew has used for years. Which one governs the lift?

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.251: Rigging equipment for material handling, OSHA 29 CFR 1910.184: Slings, OSHA 29 CFR 1926.1431: Hoisting personnel

Rigger Level I (NCCCO) cheat sheet: every key fact on one page →