Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
← Standards & Regulations

Chapter 2 · Lesson 1 of 5

Which ASME B30 volume covers what

1 min read

The ASME B30 series is a set of safety standards, each volume written for one class of equipment. A rigger needs to know which volume to open, because the rules for a sling do not answer a question about a shackle or a lifting beam.

The crane and the rigging hung from it are separate limits, and a lift has to satisfy both. Each volume also sets the markings and use rules for its own class of gear.

VolumeCovers
B30.5Mobile and locomotive cranes
B30.9Slings: chain, wire rope, metal mesh, fiber rope, web, roundslings
B30.10Hooks, including load block and sling hooks
B30.20Below-the-hook devices: lifting beams, spreaders, clamps, magnets, vacuum lifters
B30.26Detachable hardware: shackles, links, rings, eyebolts, hoist rings, turnbuckles, wire rope clips

The volumes use two kinds of wording. A provision written with shall is a requirement that must be met; one written with should is a recommendation that depends on the situation. Treating them as the same goes wrong in both directions.

Example: a lift uses a web sling, a screw-pin shackle, the crane's hook and a spreader bar. That is four volumes: B30.9, B30.26, B30.10 and B30.20, with the crane under B30.5. Answer choices that swap two volumes are the usual distractors.

Check yourself

1. A lift uses a wire rope sling, a shackle, the crane's load block hook, and a lifting beam. Which matching of each item to the ASME B30 volume that covers it is correct?

2. Which group of items is covered by ASME B30.26 Rigging Hardware?

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.251: Rigging equipment for material handling, OSHA 29 CFR 1910.184: Slings, OSHA 29 CFR 1926.1431: Hoisting personnel

Rigger Level I (NCCCO) cheat sheet: every key fact on one page →