Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
← Rigging Hardware & Lifting Devices

Chapter 6 · Lesson 2 of 4

Hooks, eyebolts and swivel hoist rings

1 min read

A hook is rated with the load in the bowl, in line with the shank. Tip loading moves the bearing point out to a long lever arm that bends the throat open.

The latch only keeps a slack sling from coming out; it carries no load and never justifies tip loading. A plain eyebolt has only its threads to resist a sideways pull, so it is rated for in-line lifting only.

A shoulder eyebolt's shoulder bears on the surface and reacts the side force, so it may take an angled pull, at a reduced rating. Installation matters: in steel, at least 1.5 times the bolt diameter of thread engagement, with the shoulder seated flush.

A shoulder held off by washers or a spacer acts like a plain eyebolt; steel flat washers are used only to turn the eye in line with the pull.

Eyebolt charts state the percent of rated load that remains. A typical manufacturer's shoulder eyebolt chart allows 30 percent at 45 degrees and 25 percent at 90 degrees. Example: a shoulder eyebolt rated 2,600 lb may take 2,600 x 0.30 = 780 lb at 45 degrees and 2,600 x 0.25 = 650 lb at 90 degrees.

Where the pull is angled, a swivel hoist ring is often the better choice: its bail pivots and swivels into line with the pull. It still needs 1.5 diameters of engagement in steel, the maker's torque, and the bushing flange flat on the surface with no spacers.

Check yourself

1. A shoulder-type eyebolt is marked with a rated load of 4,000 lb and will be pulled at 45 degrees to its axis. The manufacturer's angular-loading chart for this eyebolt allows 30 percent of the rated load at 45 degrees. What load may it take?

2. Why is a swivel hoist ring often selected instead of a shoulder eyebolt where the sling will pull at an angle?

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.251: Rigging equipment for material handling, NCCCO: Rigger Level I written exam outline, The Crosby Group: rigging hardware product and warnings information

Rigger Level I (NCCCO) cheat sheet: every key fact on one page →