Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Safety0/5
    1. Worker rights, employer duties and reporting hazards
    2. The hierarchy of controls and personal protective equipment
    3. Lockout/tagout, machine guarding and electrical hazards
    4. Hazard communication, chemical storage and fire
    5. Confined spaces and ergonomics
  2. 2.Quality Practices & Inspection0/4
    1. Quality systems, audits and the internal customer
    2. Prevention versus detection: cost of quality and inspection points
    3. Control charts and variation
    4. Root cause tools, nonconforming product and corrective action
  3. 3.Measurement & Blueprint Reading0/5
    1. Choosing and reading micrometers and calipers
    2. Indicators, transfer gauges and go/no-go gauges
    3. Calibration and conditions that affect accuracy
    4. Reading the print: views, lines, scale and the title block
    5. Limits, tolerance, allowance and GD&T basics
  4. 4.Manufacturing Processes & Materials0/5
    1. How parts are shaped: casting, molding, forging, machining and additive
    2. Joining, heat treating and finishing
    3. Materials and their properties
    4. Volume, setup cost, takt time and the bottleneck
    5. Work orders, travelers, traceability and connected machines
  5. 5.Lean & Continuous Improvement0/5
    1. Value-added, non-value-added and necessary work
    2. The eight wastes
    3. 5S, visual management and the andon
    4. Standard work, kaizen and plan-do-check-act
    5. Pull, value stream maps, quick changeover and poka-yoke
  6. 6.Maintenance Awareness0/5
    1. Reactive, preventive and predictive maintenance, and TPM
    2. PM discipline, maintenance records and warning signs
    3. Lockout/tagout and stored energy
    4. Lubrication, bearings and shaft alignment
    5. Belts, chains, motor overloads and fluid power
Saved in this browser. Move it to another device →
← Safety

Chapter 1 · Lesson 2 of 5

The hierarchy of controls and personal protective equipment

1 min read

NIOSH and OSHA rank hazard controls from most to least effective: elimination, substitution, engineering controls, administrative controls, and personal protective equipment. Higher controls remove or reduce the hazard itself and work no matter what any one person does.

PPE sits last because the hazard is still there, and protection fails the moment the equipment is the wrong type, poorly fitted, damaged or not worn. When a question asks for the best or highest control, pick the option that changes the process or the material over one that changes behavior.

Control levelExample at a noisy press line
SubstitutionReplace the press with a quieter forming method
EngineeringEnclose the press in a sound-damping cover
AdministrativeRotate operators to shorten time at the press
PPEIssue earplugs
  • A face shield is secondary protection and is always worn over safety glasses or goggles.
  • A tight-fitting respirator requires a medical evaluation and a fit test for that model and size before use, and facial hair on the seal defeats it.
  • A harness that has arrested a fall comes out of service, because the damage to webbing and stitching is often invisible.

On the exam, rotating workers and issuing respirators both leave a harmful solvent in place, while local exhaust removes vapor and switching to a safer cleaner removes the hazard itself, so substitution is the highest of those four.

Check yourself

1. A cleaning booth uses a solvent that gives off harmful vapor. Which action sits highest in the hierarchy of controls?

2. Why does the hierarchy of controls place personal protective equipment last?

Facts checked 2026-11-15 · Sources: MSSC: Certified Production Technician (CPT 4.0), OSHA 29 CFR 1910.147: The control of hazardous energy (lockout/tagout), OSHA: Hazard Communication

Production Technician cheat sheet: every key fact on one page →