Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Safety0/5
    1. Worker rights, employer duties and reporting hazards
    2. The hierarchy of controls and personal protective equipment
    3. Lockout/tagout, machine guarding and electrical hazards
    4. Hazard communication, chemical storage and fire
    5. Confined spaces and ergonomics
  2. 2.Quality Practices & Inspection0/4
    1. Quality systems, audits and the internal customer
    2. Prevention versus detection: cost of quality and inspection points
    3. Control charts and variation
    4. Root cause tools, nonconforming product and corrective action
  3. 3.Measurement & Blueprint Reading0/5
    1. Choosing and reading micrometers and calipers
    2. Indicators, transfer gauges and go/no-go gauges
    3. Calibration and conditions that affect accuracy
    4. Reading the print: views, lines, scale and the title block
    5. Limits, tolerance, allowance and GD&T basics
  4. 4.Manufacturing Processes & Materials0/5
    1. How parts are shaped: casting, molding, forging, machining and additive
    2. Joining, heat treating and finishing
    3. Materials and their properties
    4. Volume, setup cost, takt time and the bottleneck
    5. Work orders, travelers, traceability and connected machines
  5. 5.Lean & Continuous Improvement0/5
    1. Value-added, non-value-added and necessary work
    2. The eight wastes
    3. 5S, visual management and the andon
    4. Standard work, kaizen and plan-do-check-act
    5. Pull, value stream maps, quick changeover and poka-yoke
  6. 6.Maintenance Awareness0/5
    1. Reactive, preventive and predictive maintenance, and TPM
    2. PM discipline, maintenance records and warning signs
    3. Lockout/tagout and stored energy
    4. Lubrication, bearings and shaft alignment
    5. Belts, chains, motor overloads and fluid power
Saved in this browser. Move it to another device →
← Manufacturing Processes & Materials

Chapter 4 · Lesson 5 of 5

Work orders, travelers, traceability and connected machines

1 min read

Every job runs on paperwork, and the exam checks that you know which document does what. The routing sheet, often called a traveler, moves with the job and lists each operation in order with its work center and sign-off. The bill of material lists components and quantities. Packing slips and invoices belong to shipping and billing.

  • Before a job runs, the material must match the part number, specification and revision on the work order. If it does not, stop and tell the supervisor; never edit the paperwork or swap in look-alike stock.
  • Shelf-life stock is issued first in, first out, so the oldest acceptable material is used before it expires.
  • In a pull system, a kanban signal from the next process, not a forecast, tells a station to make more.
  • A lot number scanned at each step links every unit to its material, machine and operators, so a later problem can be contained to exactly the units involved.

Industry 4.0 questions test concepts. Augmented reality lays digital information, such as the next step or a part number, over the real workspace, while virtual reality replaces the view with a simulation, which suits off-line training.

Machines that stream vibration and temperature data let a rising trend be caught before failure. Data never removes the duty to keep records, follow start-up procedures, or keep guards closed.

Check yourself

1. Which document moves with the job through the plant and lists, in order, the operations the part must go through?

2. Every carton carries a lot number that is scanned at each operation. What does this practice mainly give the plant?

Facts checked 2026-11-15 · Sources: MSSC: Certified Production Technician (CPT 4.0)

Production Technician cheat sheet: every key fact on one page →