Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Safety0/5
    1. Worker rights, employer duties and reporting hazards
    2. The hierarchy of controls and personal protective equipment
    3. Lockout/tagout, machine guarding and electrical hazards
    4. Hazard communication, chemical storage and fire
    5. Confined spaces and ergonomics
  2. 2.Quality Practices & Inspection0/4
    1. Quality systems, audits and the internal customer
    2. Prevention versus detection: cost of quality and inspection points
    3. Control charts and variation
    4. Root cause tools, nonconforming product and corrective action
  3. 3.Measurement & Blueprint Reading0/5
    1. Choosing and reading micrometers and calipers
    2. Indicators, transfer gauges and go/no-go gauges
    3. Calibration and conditions that affect accuracy
    4. Reading the print: views, lines, scale and the title block
    5. Limits, tolerance, allowance and GD&T basics
  4. 4.Manufacturing Processes & Materials0/5
    1. How parts are shaped: casting, molding, forging, machining and additive
    2. Joining, heat treating and finishing
    3. Materials and their properties
    4. Volume, setup cost, takt time and the bottleneck
    5. Work orders, travelers, traceability and connected machines
  5. 5.Lean & Continuous Improvement0/5
    1. Value-added, non-value-added and necessary work
    2. The eight wastes
    3. 5S, visual management and the andon
    4. Standard work, kaizen and plan-do-check-act
    5. Pull, value stream maps, quick changeover and poka-yoke
  6. 6.Maintenance Awareness0/5
    1. Reactive, preventive and predictive maintenance, and TPM
    2. PM discipline, maintenance records and warning signs
    3. Lockout/tagout and stored energy
    4. Lubrication, bearings and shaft alignment
    5. Belts, chains, motor overloads and fluid power
Saved in this browser. Move it to another device →
← Lean & Continuous Improvement

Chapter 5 · Lesson 2 of 5

The eight wastes

1 min read

Lean names eight kinds of waste. Many trainers remember them as DOWNTIME: Defects, Overproduction, Waiting, Non-utilized talent, Transportation, Inventory (excess), Motion and Extra-processing. Exam stems describe one in plain words, so learn the key difference for each pair that is easy to confuse.

  • Motion versus transportation: motion is the person moving unnecessarily, such as walking to a shared tool cart for every part; transportation is the material moving, such as forklifting totes across the plant.
  • Extra-processing versus defects: extra-processing is doing more than the print asks, such as polishing finer than required; a defect is a part that fails the print and needs rework.
  • Non-utilized talent: operators' ideas are never collected, answered or tried.

Overproduction, making more, sooner or faster than the next process needs, is called the worst waste because it causes the others: extra inventory, handling, storage, waiting and paperwork, and it hides defects until a whole batch is made.

Example: a press runs a full extra rack of brackets to stay busy; now the rack needs floor space, a forklift move and counting, and a bad die would not be noticed until all of it is checked.

Check yourself

1. Overproduction is traditionally called the worst of the eight wastes. Why?

2. Totes of work-in-process are hauled by forklift across the plant to the next operation three times a shift. Which waste is this?

Facts checked 2026-11-15 · Sources: MSSC: Certified Production Technician (CPT 4.0)

Production Technician cheat sheet: every key fact on one page →