Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Safety0/5
    1. Worker rights, employer duties and reporting hazards
    2. The hierarchy of controls and personal protective equipment
    3. Lockout/tagout, machine guarding and electrical hazards
    4. Hazard communication, chemical storage and fire
    5. Confined spaces and ergonomics
  2. 2.Quality Practices & Inspection0/4
    1. Quality systems, audits and the internal customer
    2. Prevention versus detection: cost of quality and inspection points
    3. Control charts and variation
    4. Root cause tools, nonconforming product and corrective action
  3. 3.Measurement & Blueprint Reading0/5
    1. Choosing and reading micrometers and calipers
    2. Indicators, transfer gauges and go/no-go gauges
    3. Calibration and conditions that affect accuracy
    4. Reading the print: views, lines, scale and the title block
    5. Limits, tolerance, allowance and GD&T basics
  4. 4.Manufacturing Processes & Materials0/5
    1. How parts are shaped: casting, molding, forging, machining and additive
    2. Joining, heat treating and finishing
    3. Materials and their properties
    4. Volume, setup cost, takt time and the bottleneck
    5. Work orders, travelers, traceability and connected machines
  5. 5.Lean & Continuous Improvement0/5
    1. Value-added, non-value-added and necessary work
    2. The eight wastes
    3. 5S, visual management and the andon
    4. Standard work, kaizen and plan-do-check-act
    5. Pull, value stream maps, quick changeover and poka-yoke
  6. 6.Maintenance Awareness0/5
    1. Reactive, preventive and predictive maintenance, and TPM
    2. PM discipline, maintenance records and warning signs
    3. Lockout/tagout and stored energy
    4. Lubrication, bearings and shaft alignment
    5. Belts, chains, motor overloads and fluid power
Saved in this browser. Move it to another device →
← Lean & Continuous Improvement

Chapter 5 · Lesson 3 of 5

5S, visual management and the andon

1 min read

5S organizes a work area in a fixed order, and the order itself is tested. Sort comes first so the team does not waste effort arranging or cleaning items that should not be there.

  • Sort: remove tools, stock, fixtures and paperwork the area does not need.
  • Set in Order: give everything left a marked home near its point of use.
  • Shine: clean, and inspect while cleaning, so leaks, loose fasteners, worn belts and damaged guards are found early.
  • Standardize: post the rules where the work is done.
  • Sustain: regular scored audits and leaders who walk the area and act; a deep clean right before an audit is a display, not a system.

Visual management shows the normal condition and any deviation at a glance. A shadow board with painted tool outlines shows instantly that a tool is missing.

An andon does the same for problems: an operator who finds a defect he cannot fix at his station pulls the andon and stops the line so help comes to him, instead of passing the part downstream or quietly setting it aside.

Example: a team sorts a cluttered bench and finds three broken gauges and a box of obsolete fixtures. Removing those first means the shadow board they build next holds only tools the job actually uses.

Check yourself

1. A team is starting 5S in its work area. Which step comes first, and what does it do?

2. A cell installs a shadow board for its hand tools. What does this visual control accomplish?

Facts checked 2026-11-15 · Sources: MSSC: Certified Production Technician (CPT 4.0)

Production Technician cheat sheet: every key fact on one page →