Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Safety0/5
    1. Worker rights, employer duties and reporting hazards
    2. The hierarchy of controls and personal protective equipment
    3. Lockout/tagout, machine guarding and electrical hazards
    4. Hazard communication, chemical storage and fire
    5. Confined spaces and ergonomics
  2. 2.Quality Practices & Inspection0/4
    1. Quality systems, audits and the internal customer
    2. Prevention versus detection: cost of quality and inspection points
    3. Control charts and variation
    4. Root cause tools, nonconforming product and corrective action
  3. 3.Measurement & Blueprint Reading0/5
    1. Choosing and reading micrometers and calipers
    2. Indicators, transfer gauges and go/no-go gauges
    3. Calibration and conditions that affect accuracy
    4. Reading the print: views, lines, scale and the title block
    5. Limits, tolerance, allowance and GD&T basics
  4. 4.Manufacturing Processes & Materials0/5
    1. How parts are shaped: casting, molding, forging, machining and additive
    2. Joining, heat treating and finishing
    3. Materials and their properties
    4. Volume, setup cost, takt time and the bottleneck
    5. Work orders, travelers, traceability and connected machines
  5. 5.Lean & Continuous Improvement0/5
    1. Value-added, non-value-added and necessary work
    2. The eight wastes
    3. 5S, visual management and the andon
    4. Standard work, kaizen and plan-do-check-act
    5. Pull, value stream maps, quick changeover and poka-yoke
  6. 6.Maintenance Awareness0/5
    1. Reactive, preventive and predictive maintenance, and TPM
    2. PM discipline, maintenance records and warning signs
    3. Lockout/tagout and stored energy
    4. Lubrication, bearings and shaft alignment
    5. Belts, chains, motor overloads and fluid power
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 5 of 6

Lean & Continuous Improvement Study Guide — Production Technician

22 free practice questions

Lean and continuous improvement is not a separate MSSC module; the CPT 4.0 candidate handbook spreads it across modules, chiefly Suggest continuous improvements in Quality Practices & Measurement and Lean Manufacturing principles in Manufacturing Processes & Production, and it is about removing waste and making work better every day. Questions name a shop-floor activity and ask which waste it is, which lean tool fits, or what a team member should do next. Keep asking one question: does this step change the product in a way the customer would pay for?

Key takeaways

  • Value-added work changes the product toward what the customer ordered; required safety checks are non-value-added but necessary and are never removed.
  • Motion is waste by people, transportation is waste by material, and overproduction is the worst waste because it creates the others.
  • 5S runs Sort, Set in Order, Shine, Standardize, Sustain, and Shine doubles as inspection.
  • Standard work is the baseline, and in plan-do-check-act the Check step compares results with data taken before the change.
  • A kanban authorizes making only the quantity just used, and poka-yoke prevents an error instead of catching it afterward.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1Value-added, non-value-added and necessary work1 min
  2. 2The eight wastes1 min
  3. 35S, visual management and the andon1 min
  4. 4Standard work, kaizen and plan-do-check-act1 min
  5. 5Pull, value stream maps, quick changeover and poka-yoke1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: MSSC: Certified Production Technician (CPT 4.0)

Production Technician cheat sheet: every key fact on one page →Next chapter: Maintenance Awareness →

Practice questions based on the MSSC Production Standards and the published content of the Certified Production Technician modules, together with federal OSHA general-industry requirements and standard manufacturing practice. MSSC and CPT are marks of the Manufacturing Skills Standards Council; this site is not affiliated with or endorsed by MSSC. Questions here never depend on recalling a regulatory limit, a citation number or a machine specification — always follow your own facility's written programs and the manufacturer's documentation for the equipment you run, and confirm current requirements before testing. About the CPT certification →