Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Safety0/5
    1. Worker rights, employer duties and reporting hazards
    2. The hierarchy of controls and personal protective equipment
    3. Lockout/tagout, machine guarding and electrical hazards
    4. Hazard communication, chemical storage and fire
    5. Confined spaces and ergonomics
  2. 2.Quality Practices & Inspection0/4
    1. Quality systems, audits and the internal customer
    2. Prevention versus detection: cost of quality and inspection points
    3. Control charts and variation
    4. Root cause tools, nonconforming product and corrective action
  3. 3.Measurement & Blueprint Reading0/5
    1. Choosing and reading micrometers and calipers
    2. Indicators, transfer gauges and go/no-go gauges
    3. Calibration and conditions that affect accuracy
    4. Reading the print: views, lines, scale and the title block
    5. Limits, tolerance, allowance and GD&T basics
  4. 4.Manufacturing Processes & Materials0/5
    1. How parts are shaped: casting, molding, forging, machining and additive
    2. Joining, heat treating and finishing
    3. Materials and their properties
    4. Volume, setup cost, takt time and the bottleneck
    5. Work orders, travelers, traceability and connected machines
  5. 5.Lean & Continuous Improvement0/5
    1. Value-added, non-value-added and necessary work
    2. The eight wastes
    3. 5S, visual management and the andon
    4. Standard work, kaizen and plan-do-check-act
    5. Pull, value stream maps, quick changeover and poka-yoke
  6. 6.Maintenance Awareness0/5
    1. Reactive, preventive and predictive maintenance, and TPM
    2. PM discipline, maintenance records and warning signs
    3. Lockout/tagout and stored energy
    4. Lubrication, bearings and shaft alignment
    5. Belts, chains, motor overloads and fluid power
Saved in this browser. Move it to another device →
← Maintenance Awareness

Chapter 6 · Lesson 1 of 5

Reactive, preventive and predictive maintenance, and TPM

1 min read

Exam questions describe a maintenance task and ask which strategy it is. The deciding clue is what triggers the work: a breakdown, the calendar or hour meter, or a measured condition.

StrategyTriggerExample
ReactiveThe part has already failedReplacing a motor after it burns out
PreventiveA fixed time or hour intervalGreasing a bearing on schedule; a shutdown rebuild
PredictiveA measured condition trending worseTrending vibration, temperature or oil condition

The main advantage of preventive work over run-to-failure is that an unplanned breakdown becomes planned downtime: the stop happens at a convenient time with parts, tools and people ready, and the secondary damage a breakdown causes is avoided. It does not guarantee nothing will fail, and it does not replace spare parts or daily operator checks.

Total productive maintenance adds autonomous maintenance: operators do the routine cleaning, inspection, lubrication and tightening on their own machines, because they notice small changes first. Example: while wiping down a press at the start of shift, an operator finds a weeping hydraulic fitting and reports it, freeing technicians for repairs beyond the operator's authority.

Check yourself

1. Which activity is an example of predictive (condition-based) maintenance?

2. Compared with running equipment until it breaks, what is the main advantage of a scheduled preventive maintenance program?

Facts checked 2026-11-15 · Sources: MSSC: Certified Production Technician (CPT 4.0), OSHA 29 CFR 1910.147: The control of hazardous energy (lockout/tagout)

Production Technician cheat sheet: every key fact on one page →