Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Safety0/5
    1. Worker rights, employer duties and reporting hazards
    2. The hierarchy of controls and personal protective equipment
    3. Lockout/tagout, machine guarding and electrical hazards
    4. Hazard communication, chemical storage and fire
    5. Confined spaces and ergonomics
  2. 2.Quality Practices & Inspection0/4
    1. Quality systems, audits and the internal customer
    2. Prevention versus detection: cost of quality and inspection points
    3. Control charts and variation
    4. Root cause tools, nonconforming product and corrective action
  3. 3.Measurement & Blueprint Reading0/5
    1. Choosing and reading micrometers and calipers
    2. Indicators, transfer gauges and go/no-go gauges
    3. Calibration and conditions that affect accuracy
    4. Reading the print: views, lines, scale and the title block
    5. Limits, tolerance, allowance and GD&T basics
  4. 4.Manufacturing Processes & Materials0/5
    1. How parts are shaped: casting, molding, forging, machining and additive
    2. Joining, heat treating and finishing
    3. Materials and their properties
    4. Volume, setup cost, takt time and the bottleneck
    5. Work orders, travelers, traceability and connected machines
  5. 5.Lean & Continuous Improvement0/5
    1. Value-added, non-value-added and necessary work
    2. The eight wastes
    3. 5S, visual management and the andon
    4. Standard work, kaizen and plan-do-check-act
    5. Pull, value stream maps, quick changeover and poka-yoke
  6. 6.Maintenance Awareness0/5
    1. Reactive, preventive and predictive maintenance, and TPM
    2. PM discipline, maintenance records and warning signs
    3. Lockout/tagout and stored energy
    4. Lubrication, bearings and shaft alignment
    5. Belts, chains, motor overloads and fluid power
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 2 of 6

Quality Practices & Inspection Study Guide — Production Technician

22 free practice questions

This chapter covers the quality half of the MSSC Quality Practices and Measurement module: how a plant's quality system works, why prevention beats inspection, how to read a control chart, and what to do when a defect turns up. Questions are written from the operator's point of view, so they ask what a chart signal means or which step comes first. Measurement tools and blueprint reading, the other half of the module, have their own chapter.

Key takeaways

  • A quality management system is the documented procedures and records that control the work, not a department or an inspection station.
  • Prevention costs the least and external failure costs the most, which is why quality is built into the process instead of inspected in at the end.
  • Control limits come from process data and specification limits come from the customer or drawing, so a stable process can still be incapable.
  • A point beyond a control limit or a long run on one side of the center line means find what changed, never widen the limits or overadjust.
  • Containment protects the customer, a correction fixes the parts already made, and a corrective action removes the root cause.

Lessons in this chapter

4 short lessons · 4 min read

  1. 1Quality systems, audits and the internal customer1 min
  2. 2Prevention versus detection: cost of quality and inspection points1 min
  3. 3Control charts and variation1 min
  4. 4Root cause tools, nonconforming product and corrective action1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: MSSC: Certified Production Technician (CPT 4.0), NIST/SEMATECH e-Handbook of Statistical Methods: Introduction to control charts

Production Technician cheat sheet: every key fact on one page →Next chapter: Measurement & Blueprint Reading →

Practice questions based on the MSSC Production Standards and the published content of the Certified Production Technician modules, together with federal OSHA general-industry requirements and standard manufacturing practice. MSSC and CPT are marks of the Manufacturing Skills Standards Council; this site is not affiliated with or endorsed by MSSC. Questions here never depend on recalling a regulatory limit, a citation number or a machine specification — always follow your own facility's written programs and the manufacturer's documentation for the equipment you run, and confirm current requirements before testing. About the CPT certification →