Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Safety0/4
    1. Lockout, tagout and stored electrical energy
    2. Refrigerant, cylinders and pressure hazards
    3. Carbon monoxide and combustion hazards
    4. PPE, brazing and job-site hazards
  2. 2.Tools & Measurement0/5
    1. Measuring temperature and proving the thermometer
    2. Humidity, wet bulb and dew point
    3. Gauge pressure, absolute pressure and vacuum
    4. Using electrical meters correctly
    5. Airflow, leak detection and charging tools
  3. 3.Basic Electrical0/4
    1. Ohm's law, power and power factor
    2. Series, parallel and reading a ladder diagram
    3. Transformers, single-phase and three-phase power
    4. Single-phase motors, capacitors and winding tests
  4. 4.Science & Refrigeration Cycle0/4
    1. Heat, sensible and latent heat, and heat transfer
    2. Saturation and the four main components
    3. Calculating superheat and subcooling
    4. Metering devices and reading the charge
  5. 5.Construction, Comfort & Airflow0/4
    1. The building envelope: insulation, air sealing and windows
    2. Loads, equipment sizing and comfort
    3. Airflow, static pressure and capacity
    4. Duct leakage, noise, filters and ventilation
  6. 6.AC Components & Operation0/4
    1. Compressors and keeping liquid out
    2. Outdoor coil, indoor coil and condensate
    3. Metering devices, the TXV bulb and charging method
    4. Line sets, accessories, service valves and thermostats
  7. 7.AC Diagnosis & Service0/4
    1. Reading superheat and subcooling patterns
    2. Troubleshooting the control circuit
    3. Compressor electrical faults
    4. Airside, static pressure and condensate problems
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 5 of 7

Construction, Comfort & Airflow Study Guide — NATE HVAC

20 free practice questions

Equipment only delivers comfort when it fits the building and moves the right amount of air. This part of the NATE Core exam covers how heat and moisture move through walls and windows, how loads and comfort are judged, and how static pressure, ducts and filters control airflow. The questions reward cause-and-effect thinking: change one thing, and predict what happens to airflow, capacity and humidity.

Key takeaways

  • Insulation slows conducted heat, while air sealing stops air leakage; they are separate jobs.
  • Size new equipment from a load calculation of the house as it is today, not from the old nameplate or square footage.
  • An oversized system short cycles and leaves the space cool but damp.
  • Higher static pressure on a fixed-speed blower means less airflow and less delivered capacity.
  • Airflow from temperature rise is CFM = BTU/h ÷ (1.08 × ΔT).

Lessons in this chapter

4 short lessons · 4 min read

  1. 1The building envelope: insulation, air sealing and windows1 min
  2. 2Loads, equipment sizing and comfort1 min
  3. 3Airflow, static pressure and capacity1 min
  4. 4Duct leakage, noise, filters and ventilation1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: NATE: Certification exams, ACCA Manual J: Residential Load Calculation

NATE HVAC cheat sheet: every key fact on one page →Next chapter: AC Components & Operation →

Practice questions based on the published NATE knowledge areas and standard HVACR theory and service practice. NATE is a mark of North American Technician Excellence; this site is not affiliated with or endorsed by NATE. NATE certification is not a licence — HVAC licensing is set by your state and locality. Confirm current exam requirements with NATE and current code requirements with the authority having jurisdiction. About NATE certification →