Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/35 ▾

0 of 35 lessons finished

Continue: The FTC Eyeglass Rule
  1. 1.Ophthalmic Optics0/5
    1. Refractive index and lens power
    2. Surface power and the lens measure
    3. Prism and Prentice's rule
    4. Cylinder power in any meridian
    5. Aberrations, Abbe value and vertex distance
  2. 2.Lens Products & Materials0/5
    1. Choosing a lens material
    2. Coatings, tints and light control
    3. Bifocal and trifocal segments
    4. Progressive lenses
    5. High-power designs and impact testing
  3. 3.Prescription Analysis & Math0/5
    1. Reading and transposing a prescription
    2. Meridian powers and spherical equivalent
    3. Near and intermediate powers from the add
    4. Prism, vertical imbalance and slab-off
    5. Decentration, blank size, vertex and tilt
  4. 4.Frames, Measuring & Fitting0/5
    1. Frame materials and how they behave
    2. Temples, bridges and pads
    3. The boxing system, decentration and blank size
    4. Measuring for multifocals and progressives
    5. Pantoscopic tilt and bench alignment
  5. 5.Instruments & Verification0/5
    1. Setting up and reading a lensmeter
    2. Verifying multifocals and progressives
    3. Verifying prism and centration
    4. The lens clock and other dispensing instruments
    5. Tolerances and final inspection
  6. 6.Laws, Standards & Practice0/5
    1. The FDA impact-resistance rule
    2. The FTC Eyeglass Rule
    3. The FTC Contact Lens Rule
    4. ANSI standards and safety eyewear
    5. Scope of practice, privacy and referral
  7. 7.Ocular Anatomy & Pathology0/5
    1. The front of the eye: cornea, aqueous humor and tear drainage
    2. The crystalline lens: accommodation, aphakia and pseudophakia
    3. The retina, the optic nerve and the visual pathway
    4. Eye diseases an optician must recognize and refer
    5. Visual acuity, astigmatism types and binocular vision
Saved in this browser. Move it to another device →
← Laws, Standards & Practice

Chapter 6 · Lesson 1 of 5

The FDA impact-resistance rule

Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.

1 min read

Under 21 CFR 801.410, lenses in eyeglasses and sunglasses must be impact resistant, whether or not they carry a prescription. The aim is to keep lens fragments out of the eye. Contact lenses are not covered by this rule; they are regulated as medical devices under other provisions.

Only the prescriber can make an exception. A physician or optometrist must find that impact-resistant lenses will not meet the patient's visual needs, direct other lenses in writing, and give the patient written notice. A patient's own signed waiver does not create the exemption.

  • Test: a 5/8-inch steel ball weighing about 0.56 ounce is dropped 50 inches onto the upper surface of the lens.
  • Finished glass prescription lenses are tested one by one; plastic and laminated lenses may be tested by statistical batch sampling.
  • Some designs are exempt from routine testing but must still be impact resistant: raised multifocals need only initial design testing, and lenses such as slab-off prism, lenticular cataract, myodisc and cemented assemblies need not be drop-tested.
  • Testers keep test results and a description of the method and apparatus, and sale or distribution records are kept too, for 3 years, available to the FDA.

Example: a customer buys plano fashion sunglasses off a rack. They are still covered, because the rule reaches nonprescription sunglass lenses as well.

Check yourself

1. A patient insists on a lens material that is not impact resistant and offers to sign a waiver releasing the optical from responsibility. Under the federal impact-resistance regulation, who may authorize dispensing spectacle lenses that are not impact resistant?

2. A walk-in customer buys a pair of nonprescription tinted sunglasses off the display rack, and another customer picks up a finished single-vision prescription pair. Under the federal impact-resistance requirement for spectacle lenses enforced by the FDA, which statement correctly describes the scope of that requirement?

Facts checked 2026-11-15 · Sources: 21 CFR 801.410: Use of impact-resistant lenses in eyeglasses and sunglasses, 16 CFR Part 456: Ophthalmic Practice Rules (Eyeglass Rule), 16 CFR Part 315: Contact Lens Rule, eCFR: 16 CFR 456.4 Confirmation of prescription release, Federal Register: Ophthalmic Practice Rules (Eyeglass Rule) final rule, 89 FR 60742 (July 26, 2024), eCFR: 16 CFR 315.3 Availability of contact lens prescriptions to patients, OSHA: 29 CFR 1910.133 Eye and face protection

Optician (ABO) cheat sheet: every key fact on one page →