Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/35 ▾
  1. 1.Ophthalmic Optics0/5
    1. Refractive index and lens power
    2. Surface power and the lens measure
    3. Prism and Prentice's rule
    4. Cylinder power in any meridian
    5. Aberrations, Abbe value and vertex distance
  2. 2.Lens Products & Materials0/5
    1. Choosing a lens material
    2. Coatings, tints and light control
    3. Bifocal and trifocal segments
    4. Progressive lenses
    5. High-power designs and impact testing
  3. 3.Prescription Analysis & Math0/5
    1. Reading and transposing a prescription
    2. Meridian powers and spherical equivalent
    3. Near and intermediate powers from the add
    4. Prism, vertical imbalance and slab-off
    5. Decentration, blank size, vertex and tilt
  4. 4.Frames, Measuring & Fitting0/5
    1. Frame materials and how they behave
    2. Temples, bridges and pads
    3. The boxing system, decentration and blank size
    4. Measuring for multifocals and progressives
    5. Pantoscopic tilt and bench alignment
  5. 5.Instruments & Verification0/5
    1. Setting up and reading a lensmeter
    2. Verifying multifocals and progressives
    3. Verifying prism and centration
    4. The lens clock and other dispensing instruments
    5. Tolerances and final inspection
  6. 6.Laws, Standards & Practice0/5
    1. The FDA impact-resistance rule
    2. The FTC Eyeglass Rule
    3. The FTC Contact Lens Rule
    4. ANSI standards and safety eyewear
    5. Scope of practice, privacy and referral
  7. 7.Ocular Anatomy & Pathology0/5
    1. The front of the eye: cornea, aqueous humor and tear drainage
    2. The crystalline lens: accommodation, aphakia and pseudophakia
    3. The retina, the optic nerve and the visual pathway
    4. Eye diseases an optician must recognize and refer
    5. Visual acuity, astigmatism types and binocular vision
Saved in this browser. Move it to another device →
← Frames, Measuring & Fitting

Chapter 4 · Lesson 3 of 5

The boxing system, decentration and blank size

Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.

1 min read

The boxing system draws a box around each lens shape. A is the horizontal width, B the vertical depth, and DBL the shortest distance between the two shapes. A frame marked 52 □ 18 140 has A = 52, DBL = 18 and 140 mm temples.

The geometric center distance, or frame PD, is A + DBL. The effective diameter is twice the longest radius from the geometric center to the edge, the smallest round blank that would cover the shape without decentration.

With monocular PDs, work each eye separately. Example: a 49 □ 21 frame has a frame PD of 70, so each geometric center is 35 mm from the midline.

Monocular PDs of 33 right and 32 left give 35 − 33 = 2 mm in on the right and 35 − 32 = 3 mm in on the left.

With a 53 mm effective diameter and a 2 mm edging allowance, the right lens needs 53 + 4 + 2 = 59 mm and the left 53 + 6 + 2 = 61 mm.

Check yourself

1. A lens shape has an effective diameter of 56 mm and each lens must be decentered 4 mm. Allowing 2 mm for edging, what is the minimum blank size?

2. In the boxing system, what does the effective diameter of a lens shape describe?

Facts checked 2026-11-15 · Sources: American Board of Opticianry and National Contact Lens Examiners (ABO-NCLE), 20/20 Magazine: Martin's rule of tilt, 1 mm of optical center drop per 2 degrees of pantoscopic tilt, ABDO: Mo Jalie on fitting and pantoscopic tilt (PDF), Laramy-K Optical: polycarbonate and Trivex in drill mounts

Optician (ABO) cheat sheet: every key fact on one page →