Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/35 ▾

0 of 35 lessons finished

Continue: Choosing a lens material
  1. 1.Ophthalmic Optics0/5
    1. Refractive index and lens power
    2. Surface power and the lens measure
    3. Prism and Prentice's rule
    4. Cylinder power in any meridian
    5. Aberrations, Abbe value and vertex distance
  2. 2.Lens Products & Materials0/5
    1. Choosing a lens material
    2. Coatings, tints and light control
    3. Bifocal and trifocal segments
    4. Progressive lenses
    5. High-power designs and impact testing
  3. 3.Prescription Analysis & Math0/5
    1. Reading and transposing a prescription
    2. Meridian powers and spherical equivalent
    3. Near and intermediate powers from the add
    4. Prism, vertical imbalance and slab-off
    5. Decentration, blank size, vertex and tilt
  4. 4.Frames, Measuring & Fitting0/5
    1. Frame materials and how they behave
    2. Temples, bridges and pads
    3. The boxing system, decentration and blank size
    4. Measuring for multifocals and progressives
    5. Pantoscopic tilt and bench alignment
  5. 5.Instruments & Verification0/5
    1. Setting up and reading a lensmeter
    2. Verifying multifocals and progressives
    3. Verifying prism and centration
    4. The lens clock and other dispensing instruments
    5. Tolerances and final inspection
  6. 6.Laws, Standards & Practice0/5
    1. The FDA impact-resistance rule
    2. The FTC Eyeglass Rule
    3. The FTC Contact Lens Rule
    4. ANSI standards and safety eyewear
    5. Scope of practice, privacy and referral
  7. 7.Ocular Anatomy & Pathology0/5
    1. The front of the eye: cornea, aqueous humor and tear drainage
    2. The crystalline lens: accommodation, aphakia and pseudophakia
    3. The retina, the optic nerve and the visual pathway
    4. Eye diseases an optician must recognize and refer
    5. Visual acuity, astigmatism types and binocular vision
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 2 of 7

Lens Products & Materials Study Guide — Optician (ABO)

Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.

34 free practice questions

The lens-products questions ask you to pick the right material, treatment and design for a specific wearer, then explain why. Most stems describe a person, such as a child athlete, a high myope or a first-time progressive wearer, and the right answer meets the real need, not the product word the customer used. The physical properties below are the ones the exam leans on.

Key takeaways

  • Children, sports wearers, monocular patients and drilled rimless mountings call for polycarbonate or Trivex, because impact safety ranks ahead of thinness.
  • Index controls thickness, specific gravity controls weight, and Abbe value controls color fringing; judge each property separately.
  • A dark tint does not block ultraviolet, so an untreated CR-39 sun lens needs a separate UV treatment.
  • Image jump equals the add times the distance from the segment top to the segment's optical center, which is why an Executive style has essentially none.
  • Progressive lenses need monocular PDs and a fitting height taken in the adjusted frame, plus a frame deep enough for the design's minimum fitting height.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1Choosing a lens material1 min
  2. 2Coatings, tints and light control1 min
  3. 3Bifocal and trifocal segments1 min
  4. 4Progressive lenses1 min
  5. 5High-power designs and impact testing1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: American Board of Opticianry and National Contact Lens Examiners (ABO-NCLE), 21 CFR 801.410: Use of impact-resistant lenses in eyeglasses and sunglasses, eCFR: 21 CFR 801.410 (current text), OSHA 29 CFR 1910.133: Eye and face protection (ANSI Z87.1)

Optician (ABO) cheat sheet: every key fact on one page →Next chapter: Prescription Analysis & Math →

Practice questions based on the American Board of Opticianry Basic Certification exam content outline, standard ophthalmic dispensing references, and the federal rules that govern eyewear (the FDA impact-resistance requirement and the FTC Eyeglass and Contact Lens Rules). ABO and NCLE are marks of the American Board of Opticianry and National Contact Lens Examiners; this site is not affiliated with or endorsed by them. Opticianry is licensed in only some states and the requirements differ — confirm your own state board's practice act and the current exam format before testing. About the ABO exam →