Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/35 ▾

0 of 35 lessons finished

Continue: Progressive lenses
  1. 1.Ophthalmic Optics0/5
    1. Refractive index and lens power
    2. Surface power and the lens measure
    3. Prism and Prentice's rule
    4. Cylinder power in any meridian
    5. Aberrations, Abbe value and vertex distance
  2. 2.Lens Products & Materials0/5
    1. Choosing a lens material
    2. Coatings, tints and light control
    3. Bifocal and trifocal segments
    4. Progressive lenses
    5. High-power designs and impact testing
  3. 3.Prescription Analysis & Math0/5
    1. Reading and transposing a prescription
    2. Meridian powers and spherical equivalent
    3. Near and intermediate powers from the add
    4. Prism, vertical imbalance and slab-off
    5. Decentration, blank size, vertex and tilt
  4. 4.Frames, Measuring & Fitting0/5
    1. Frame materials and how they behave
    2. Temples, bridges and pads
    3. The boxing system, decentration and blank size
    4. Measuring for multifocals and progressives
    5. Pantoscopic tilt and bench alignment
  5. 5.Instruments & Verification0/5
    1. Setting up and reading a lensmeter
    2. Verifying multifocals and progressives
    3. Verifying prism and centration
    4. The lens clock and other dispensing instruments
    5. Tolerances and final inspection
  6. 6.Laws, Standards & Practice0/5
    1. The FDA impact-resistance rule
    2. The FTC Eyeglass Rule
    3. The FTC Contact Lens Rule
    4. ANSI standards and safety eyewear
    5. Scope of practice, privacy and referral
  7. 7.Ocular Anatomy & Pathology0/5
    1. The front of the eye: cornea, aqueous humor and tear drainage
    2. The crystalline lens: accommodation, aphakia and pseudophakia
    3. The retina, the optic nerve and the visual pathway
    4. Eye diseases an optician must recognize and refer
    5. Visual acuity, astigmatism types and binocular vision
Saved in this browser. Move it to another device →
← Lens Products & Materials

Chapter 2 · Lesson 3 of 5

Bifocal and trifocal segments

Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.

1 min read

Image jump is the sudden prism the wearer meets when the line of sight crosses the top of a segment, and it depends only on the segment style and add, not on the distance prescription.

By Prentice's rule it equals the add power times the distance, in centimeters, from the segment top down to the segment's optical center. The farther that optical center sits below the line, the bigger the jump.

  • Executive (full-width) style: the segment optical center sits on the dividing line, so image jump is essentially zero.
  • Round segment: the optical center is at the middle of the circle, the farthest below the top, so it jumps the most.
  • Image displacement is different: it is the total prism at the reading point, the distance lens prism and the segment prism combined, so a minus distance lens and a plus segment can partly cancel.

Example: a round segment 22 mm wide with a +2.00 add has its optical center 11 mm below the top, so the jump is 2.00 × 1.1 = 2.20 prism diopters.

In trifocal notation such as 7 × 28, the first number is the height of the intermediate zone and the second is the segment width, and a standard trifocal's intermediate is half the add, so a +2.00 add gives +1.00.

Check yourself

1. Four bifocal styles carry the same +2.00 add. Which produces essentially no image jump, and why?

2. An optician explains image jump and image displacement to a student. Which statement distinguishes them correctly?

Facts checked 2026-11-15 · Sources: American Board of Opticianry and National Contact Lens Examiners (ABO-NCLE), 21 CFR 801.410: Use of impact-resistant lenses in eyeglasses and sunglasses, eCFR: 21 CFR 801.410 (current text), OSHA 29 CFR 1910.133: Eye and face protection (ANSI Z87.1)

Optician (ABO) cheat sheet: every key fact on one page →