Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/35 ▾
  1. 1.Ophthalmic Optics0/5
    1. Refractive index and lens power
    2. Surface power and the lens measure
    3. Prism and Prentice's rule
    4. Cylinder power in any meridian
    5. Aberrations, Abbe value and vertex distance
  2. 2.Lens Products & Materials0/5
    1. Choosing a lens material
    2. Coatings, tints and light control
    3. Bifocal and trifocal segments
    4. Progressive lenses
    5. High-power designs and impact testing
  3. 3.Prescription Analysis & Math0/5
    1. Reading and transposing a prescription
    2. Meridian powers and spherical equivalent
    3. Near and intermediate powers from the add
    4. Prism, vertical imbalance and slab-off
    5. Decentration, blank size, vertex and tilt
  4. 4.Frames, Measuring & Fitting0/5
    1. Frame materials and how they behave
    2. Temples, bridges and pads
    3. The boxing system, decentration and blank size
    4. Measuring for multifocals and progressives
    5. Pantoscopic tilt and bench alignment
  5. 5.Instruments & Verification0/5
    1. Setting up and reading a lensmeter
    2. Verifying multifocals and progressives
    3. Verifying prism and centration
    4. The lens clock and other dispensing instruments
    5. Tolerances and final inspection
  6. 6.Laws, Standards & Practice0/5
    1. The FDA impact-resistance rule
    2. The FTC Eyeglass Rule
    3. The FTC Contact Lens Rule
    4. ANSI standards and safety eyewear
    5. Scope of practice, privacy and referral
  7. 7.Ocular Anatomy & Pathology0/5
    1. The front of the eye: cornea, aqueous humor and tear drainage
    2. The crystalline lens: accommodation, aphakia and pseudophakia
    3. The retina, the optic nerve and the visual pathway
    4. Eye diseases an optician must recognize and refer
    5. Visual acuity, astigmatism types and binocular vision
Saved in this browser. Move it to another device →
← Ophthalmic Optics

Chapter 1 · Lesson 1 of 5

Refractive index and lens power

Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.

1 min read

Light travels more slowly inside a lens than in air. Refractive index, n = c/v, compares the speed of light in a vacuum with its speed in the material, so a 1.60 material carries light at about 1/1.60 of its vacuum speed.

The more the light slows, the more it changes direction at each surface. That is why a higher-index lens reaches the same power with flatter curves.

Lens power in diopters is the reciprocal of the focal length in meters: F = 1/f. A plus lens converges light from a distant object to a real, inverted image behind the lens. A minus lens diverges the light, the rays never cross, and the eye traces them back to an upright virtual image on the object side.

Example: a lens that focuses distant light 50 cm behind it has F = 1/0.50 = +2.00 D. The same reciprocal gives the focusing demand of a working distance. Reading at 33 cm asks for about 1/0.33 = 3.00 D, and a presbyope with no accommodation left needs an add that supplies all of it.

  • Myopia: the eye is too strong for its length, distant light focuses in front of the retina, and a minus lens moves the focus back onto it.
  • Hyperopia: distant light focuses behind the retina, and a plus lens adds the missing convergence.

Check yourself

1. A thin lens brings light from a distant object to a focus 25 cm behind the lens. What is the power of that lens?

2. A spectacle lens is made from a material with a refractive index of 1.60. What does that value tell you about light inside the material?

Facts checked 2026-11-15 · Sources: American Board of Opticianry and National Contact Lens Examiners (ABO-NCLE), ABO-NCLE Basic Exam Handbook (December 2023), OpenStax College Physics 2e: Image Formation by Lenses

Optician (ABO) cheat sheet: every key fact on one page →