Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/35 ▾
  1. 1.Ophthalmic Optics0/5
    1. Refractive index and lens power
    2. Surface power and the lens measure
    3. Prism and Prentice's rule
    4. Cylinder power in any meridian
    5. Aberrations, Abbe value and vertex distance
  2. 2.Lens Products & Materials0/5
    1. Choosing a lens material
    2. Coatings, tints and light control
    3. Bifocal and trifocal segments
    4. Progressive lenses
    5. High-power designs and impact testing
  3. 3.Prescription Analysis & Math0/5
    1. Reading and transposing a prescription
    2. Meridian powers and spherical equivalent
    3. Near and intermediate powers from the add
    4. Prism, vertical imbalance and slab-off
    5. Decentration, blank size, vertex and tilt
  4. 4.Frames, Measuring & Fitting0/5
    1. Frame materials and how they behave
    2. Temples, bridges and pads
    3. The boxing system, decentration and blank size
    4. Measuring for multifocals and progressives
    5. Pantoscopic tilt and bench alignment
  5. 5.Instruments & Verification0/5
    1. Setting up and reading a lensmeter
    2. Verifying multifocals and progressives
    3. Verifying prism and centration
    4. The lens clock and other dispensing instruments
    5. Tolerances and final inspection
  6. 6.Laws, Standards & Practice0/5
    1. The FDA impact-resistance rule
    2. The FTC Eyeglass Rule
    3. The FTC Contact Lens Rule
    4. ANSI standards and safety eyewear
    5. Scope of practice, privacy and referral
  7. 7.Ocular Anatomy & Pathology0/5
    1. The front of the eye: cornea, aqueous humor and tear drainage
    2. The crystalline lens: accommodation, aphakia and pseudophakia
    3. The retina, the optic nerve and the visual pathway
    4. Eye diseases an optician must recognize and refer
    5. Visual acuity, astigmatism types and binocular vision
Saved in this browser. Move it to another device →
← Ocular Anatomy & Pathology

Chapter 7 · Lesson 5 of 5

Visual acuity, astigmatism types and binocular vision

Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.

1 min read

Snellen acuity is a fraction of distances, not a score. The top number is the testing distance and the bottom number is the distance at which a normal eye can read that line.

Example: 20/60 means the person must stand at 20 feet to read letters a normal eye reads from 60 feet. The fraction does not count letters read, and it does not convert into a lens power.

Myopic eyes focus distant light in front of the retina and need minus; hyperopic eyes focus it behind and need plus. Astigmatism adds two focal lines, and the type is named by where they fall.

A cylinder has no power along its axis, so in pl +1.00 × 090 the 090 meridian is plano and the 180 meridian is +1.00. One focal line is on the retina and one is behind it: simple hyperopic astigmatism.

Binocular vision questions turn on two words. A tropia, or strabismus, is an eye turn visible all the time. A phoria is a latent deviation that fusion keeps hidden while both eyes work together.

The alternate cover test breaks fusion: the covered eye drifts to its resting position and moves back when uncovered, revealing the phoria. When prism is prescribed, it bends light toward its base, so the wearer sees the object shifted toward the apex. That shift places the image where a deviated eye is pointing.

Check yourself

1. Which statement correctly describes a phoria and how it is usually detected?

2. A customer's visual acuity is recorded as 20/40. What does this mean?

Facts checked 2026-11-16 · Sources: ABO-NCLE Basic Exam Handbook (December 2023), Domain II: Ocular Anatomy, Physiology, Pathology, and Refraction, National Eye Institute: Glaucoma, National Eye Institute: Retinal Detachment

Optician (ABO) cheat sheet: every key fact on one page →