Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/35 ▾
  1. 1.Ophthalmic Optics0/5
    1. Refractive index and lens power
    2. Surface power and the lens measure
    3. Prism and Prentice's rule
    4. Cylinder power in any meridian
    5. Aberrations, Abbe value and vertex distance
  2. 2.Lens Products & Materials0/5
    1. Choosing a lens material
    2. Coatings, tints and light control
    3. Bifocal and trifocal segments
    4. Progressive lenses
    5. High-power designs and impact testing
  3. 3.Prescription Analysis & Math0/5
    1. Reading and transposing a prescription
    2. Meridian powers and spherical equivalent
    3. Near and intermediate powers from the add
    4. Prism, vertical imbalance and slab-off
    5. Decentration, blank size, vertex and tilt
  4. 4.Frames, Measuring & Fitting0/5
    1. Frame materials and how they behave
    2. Temples, bridges and pads
    3. The boxing system, decentration and blank size
    4. Measuring for multifocals and progressives
    5. Pantoscopic tilt and bench alignment
  5. 5.Instruments & Verification0/5
    1. Setting up and reading a lensmeter
    2. Verifying multifocals and progressives
    3. Verifying prism and centration
    4. The lens clock and other dispensing instruments
    5. Tolerances and final inspection
  6. 6.Laws, Standards & Practice0/5
    1. The FDA impact-resistance rule
    2. The FTC Eyeglass Rule
    3. The FTC Contact Lens Rule
    4. ANSI standards and safety eyewear
    5. Scope of practice, privacy and referral
  7. 7.Ocular Anatomy & Pathology0/5
    1. The front of the eye: cornea, aqueous humor and tear drainage
    2. The crystalline lens: accommodation, aphakia and pseudophakia
    3. The retina, the optic nerve and the visual pathway
    4. Eye diseases an optician must recognize and refer
    5. Visual acuity, astigmatism types and binocular vision
Saved in this browser. Move it to another device →
← Prescription Analysis & Math

Chapter 3 · Lesson 1 of 5

Reading and transposing a prescription

Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.

1 min read

OD is the right eye, OS the left and OU both. A sphero-cylinder is written as sphere, cylinder and axis, and the axis runs only from 001 to 180. The add is never a power on its own: it is added to each eye's distance sphere.

Prism written for one eye stays on that eye unless the prescriber authorizes splitting it.

The same lens can be written in plus-cylinder or minus-cylinder form. Transposition has three steps in order:

  • New sphere: add the sphere and cylinder algebraically.
  • New cylinder: same amount, opposite sign.
  • New axis: add 90 if the axis is 90 or less, subtract 90 if it is over 90.

Example: +2.25 −1.50 × 030. The new sphere is +2.25 + (−1.50) = +0.75, the cylinder becomes +1.50, and 030 + 90 = 120, giving +0.75 +1.50 × 120. Both forms describe exactly the same lens.

If an axis such as 195 ever appears, or a cylinder has no sign, that is an ambiguity for the prescriber to resolve, not something to fix by guessing.

Check yourself

1. A prescription is written in plus-cylinder form as +1.50 +2.25 x 065. Written in minus-cylinder form, the same lens is:

2. A spectacle prescription reads OD +1.75 -0.75 x 180, OS +2.00 -0.50 x 010, Add +1.50 OU, with 2 prism diopters base down before the right eye. Which statement correctly describes what this prescription specifies?

Facts checked 2026-11-15 · Sources: American Board of Opticianry and National Contact Lens Examiners (ABO-NCLE)

Optician (ABO) cheat sheet: every key fact on one page →