Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/35 ▾
  1. 1.Ophthalmic Optics0/5
    1. Refractive index and lens power
    2. Surface power and the lens measure
    3. Prism and Prentice's rule
    4. Cylinder power in any meridian
    5. Aberrations, Abbe value and vertex distance
  2. 2.Lens Products & Materials0/5
    1. Choosing a lens material
    2. Coatings, tints and light control
    3. Bifocal and trifocal segments
    4. Progressive lenses
    5. High-power designs and impact testing
  3. 3.Prescription Analysis & Math0/5
    1. Reading and transposing a prescription
    2. Meridian powers and spherical equivalent
    3. Near and intermediate powers from the add
    4. Prism, vertical imbalance and slab-off
    5. Decentration, blank size, vertex and tilt
  4. 4.Frames, Measuring & Fitting0/5
    1. Frame materials and how they behave
    2. Temples, bridges and pads
    3. The boxing system, decentration and blank size
    4. Measuring for multifocals and progressives
    5. Pantoscopic tilt and bench alignment
  5. 5.Instruments & Verification0/5
    1. Setting up and reading a lensmeter
    2. Verifying multifocals and progressives
    3. Verifying prism and centration
    4. The lens clock and other dispensing instruments
    5. Tolerances and final inspection
  6. 6.Laws, Standards & Practice0/5
    1. The FDA impact-resistance rule
    2. The FTC Eyeglass Rule
    3. The FTC Contact Lens Rule
    4. ANSI standards and safety eyewear
    5. Scope of practice, privacy and referral
  7. 7.Ocular Anatomy & Pathology0/5
    1. The front of the eye: cornea, aqueous humor and tear drainage
    2. The crystalline lens: accommodation, aphakia and pseudophakia
    3. The retina, the optic nerve and the visual pathway
    4. Eye diseases an optician must recognize and refer
    5. Visual acuity, astigmatism types and binocular vision
Saved in this browser. Move it to another device →
← Ophthalmic Optics

Chapter 1 · Lesson 3 of 5

Prism and Prentice's rule

Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.

1 min read

One prism diopter displaces an image 1 cm at a distance of 1 m, so prism equals displacement in centimeters divided by distance in meters.

The optical center is the one point where a ray passes through undeviated. Everywhere else the lens acts as a prism, and the farther the line of sight is from the optical center, the more prism it meets.

Prentice's rule: prism = lens power × decentration in centimeters. For the base direction, picture a plus lens as two prisms joined base to base, so the base points toward the optical center. A minus lens is two prisms joined apex to apex, so the base points away from it.

Example: the wearer looks 3 mm below the optical center of a −4.00 D sphere. Prism = 4.00 × 0.3 = 1.20 prism diopters, and in a minus lens the base lies away from the center, so it is base down.

The same point on a +4.00 D lens gives 1.20 base up. When one lens needs horizontal and vertical prism, the two act at right angles and combine by the Pythagorean theorem: 5 base in with 12 base up gives √(25 + 144) = 13 prism diopters, base up and in.

Check yourself

1. A left lens is a -6.00 D sphere, and the wearer's line of sight passes 2.5 mm temporal to its optical center. What prismatic effect does the wearer experience?

2. The right lens of a finished pair is a +3.00 D sphere. The wearer's line of sight passes through a point 4 mm above the optical center. What prismatic effect is induced?

Facts checked 2026-11-15 · Sources: American Board of Opticianry and National Contact Lens Examiners (ABO-NCLE), ABO-NCLE Basic Exam Handbook (December 2023), OpenStax College Physics 2e: Image Formation by Lenses

Optician (ABO) cheat sheet: every key fact on one page →