Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/35 ▾
  1. 1.Ophthalmic Optics0/5
    1. Refractive index and lens power
    2. Surface power and the lens measure
    3. Prism and Prentice's rule
    4. Cylinder power in any meridian
    5. Aberrations, Abbe value and vertex distance
  2. 2.Lens Products & Materials0/5
    1. Choosing a lens material
    2. Coatings, tints and light control
    3. Bifocal and trifocal segments
    4. Progressive lenses
    5. High-power designs and impact testing
  3. 3.Prescription Analysis & Math0/5
    1. Reading and transposing a prescription
    2. Meridian powers and spherical equivalent
    3. Near and intermediate powers from the add
    4. Prism, vertical imbalance and slab-off
    5. Decentration, blank size, vertex and tilt
  4. 4.Frames, Measuring & Fitting0/5
    1. Frame materials and how they behave
    2. Temples, bridges and pads
    3. The boxing system, decentration and blank size
    4. Measuring for multifocals and progressives
    5. Pantoscopic tilt and bench alignment
  5. 5.Instruments & Verification0/5
    1. Setting up and reading a lensmeter
    2. Verifying multifocals and progressives
    3. Verifying prism and centration
    4. The lens clock and other dispensing instruments
    5. Tolerances and final inspection
  6. 6.Laws, Standards & Practice0/5
    1. The FDA impact-resistance rule
    2. The FTC Eyeglass Rule
    3. The FTC Contact Lens Rule
    4. ANSI standards and safety eyewear
    5. Scope of practice, privacy and referral
  7. 7.Ocular Anatomy & Pathology0/5
    1. The front of the eye: cornea, aqueous humor and tear drainage
    2. The crystalline lens: accommodation, aphakia and pseudophakia
    3. The retina, the optic nerve and the visual pathway
    4. Eye diseases an optician must recognize and refer
    5. Visual acuity, astigmatism types and binocular vision
Saved in this browser. Move it to another device →
← Frames, Measuring & Fitting

Chapter 4 · Lesson 2 of 5

Temples, bridges and pads

Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.

1 min read

The aim of every fitting choice is to spread the frame's weight over as much skin as possible and keep it from sliding off. A cable temple curls around the whole ear, so the frame cannot be pulled straight forward; that is why it is the standard choice for toddlers, very active wearers and safety eyewear.

A library temple has no bend at all and holds only by pressure against the head. Making a temple longer than measured does not add hold: the bend then sits past the ear, where it grips nothing.

Bridges follow the same logic. A keyhole bridge flares away from the top of the nose and rests on its sides, so it suits a narrow, high crest that a heavy frame is marking. A saddle bridge does the opposite and spreads weight along the crest itself.

Adjustable pads control height. The nose widens as it goes down, so moving the pads closer together seats the frame higher, and spreading them apart lets it drop. Moving the earpiece bend farther back lengthens the effective temple and also lets the front drop.

Example: a progressive wearer whose frame rides low and who keeps catching the near zone at distance needs the pads narrowed, not more pantoscopic tilt, which changes the angle of the front rather than its height.

Check yourself

1. A patient with a narrow, high nasal crest says her heavy plastic frame digs a deep groove into the top of her nose. Which bridge design addresses this?

2. A metal frame with adjustable pads rides too low, and the wearer keeps looking over the top of the segment line. Which adjustment raises the front?

Facts checked 2026-11-15 · Sources: American Board of Opticianry and National Contact Lens Examiners (ABO-NCLE), 20/20 Magazine: Martin's rule of tilt, 1 mm of optical center drop per 2 degrees of pantoscopic tilt, ABDO: Mo Jalie on fitting and pantoscopic tilt (PDF), Laramy-K Optical: polycarbonate and Trivex in drill mounts

Optician (ABO) cheat sheet: every key fact on one page →