Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/32 ▾
  1. 1.Electrical Maintenance & Repair0/4
    1. Overloads, short circuits and ground faults
    2. Wiring receptacles, switches and fixtures
    3. Working safely: de-energize, test, then touch
    4. Ohm's law, Watt's law and the multimeter
  2. 2.Plumbing Maintenance & Repair0/4
    1. Supply, distribution and drainage: traps and vents
    2. Shutoffs, leaks and water damage
    3. Toilets, faucets and clearing drains
    4. Water heaters and joining pipe
  3. 3.HVAC Service & When to Refer0/5
    1. Airflow: filters, returns, registers and coils
    2. Condensate drains, pans and float switches
    3. Thermostats and controls
    4. The refrigeration cycle, superheat and EPA Section 608
    5. Furnaces, heat pumps, boilers and gas safety
  4. 4.Appliances, Locks & Keys0/5
    1. Refrigerators: moving heat out of the box
    2. Kitchen appliances: ranges, dishwashers, disposals and hoods
    3. Washers and dryers
    4. Reading schematics and testing parts
    5. Locks, keys and lockouts
  5. 5.Interior & Exterior Repair0/5
    1. Drywall repair
    2. Primer, paint and sheen
    3. Texture and caulk
    4. Doors, windows, cabinets and floors
    5. Exterior, ladders and suspect materials
  6. 6.Compliance, Safety & Fair Housing0/4
    1. Chemicals, PPE and sharps
    2. Lockout/tagout, confined spaces and ladders
    3. Fair housing in maintenance work
    4. Lead, asbestos, mold, pests and records
  7. 7.Facilities Operations & Professionalism0/5
    1. Prioritizing service requests and entering homes
    2. Make-ready turns, inspections and curb appeal
    3. Preventive maintenance, repair or replace, and contractors
    4. Pool and spa chemistry and math
    5. Life safety, reporting and records
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 3 of 7

HVAC Service & When to Refer Study Guide — CAMT Apartment Maintenance

29 free practice questions

The HVAC questions on the CAMT exam focus on routine service a maintenance technician does every week, such as filters, airflow, condensate drains and thermostats, and on knowing when a job must go to a certified or licensed contractor. You also need the basic refrigeration cycle, what superheat and subcooling mean, and the EPA Section 608 rules. Gas odors and carbon monoxide are always treated as life-safety emergencies.

Key takeaways

  • Most no-cooling and frozen-coil calls start with airflow: a dirty or wrong-size filter, a blocked return, closed registers or a dirty coil.
  • Water dripping from the auxiliary drain or a unit stopped by its float switch means the primary condensate drain is blocked.
  • Superheat is measured on the suction vapor and subcooling on the liquid line, and each is a difference from the saturation temperature.
  • Under EPA Section 608, even attaching gauges to a sealed system requires certification, and refrigerant is recovered, never vented.
  • For a gas smell, get people out without using switches or phones and call from outside; for a CO alarm with soot or a yellow flame, shut the appliance down and refer it.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1Airflow: filters, returns, registers and coils1 min
  2. 2Condensate drains, pans and float switches1 min
  3. 3Thermostats and controls1 min
  4. 4The refrigeration cycle, superheat and EPA Section 6081 min
  5. 5Furnaces, heat pumps, boilers and gas safety1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: NAAEI: Certificate for Apartment Maintenance Technicians (CAMT), EPA: Section 608 of the Clean Air Act (refrigerant management), EPA: Universal waste (mercury-containing equipment)

CAMT Apartment Maintenance cheat sheet: every key fact on one page →Next chapter: Appliances, Locks & Keys →

Practice questions based on the published NAAEI CAMT domains — Essential Trade Skills, Compliance, Facilities Operations, and Professional Development & Collaboration — and on standard trade practice. CAMT and NAAEI are marks of the National Apartment Association; this site is not affiliated with or endorsed by NAA or NAAEI. Code requirements, licensing boundaries and permit rules vary by jurisdiction and revise on a cycle, so none is tested here as a recalled figure — always verify the code having jurisdiction and use a licensed contractor where the work requires one. Confirm current program requirements with NAAEI before testing. About the CAMT credential →