Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/32 ▾
  1. 1.Electrical Maintenance & Repair0/4
    1. Overloads, short circuits and ground faults
    2. Wiring receptacles, switches and fixtures
    3. Working safely: de-energize, test, then touch
    4. Ohm's law, Watt's law and the multimeter
  2. 2.Plumbing Maintenance & Repair0/4
    1. Supply, distribution and drainage: traps and vents
    2. Shutoffs, leaks and water damage
    3. Toilets, faucets and clearing drains
    4. Water heaters and joining pipe
  3. 3.HVAC Service & When to Refer0/5
    1. Airflow: filters, returns, registers and coils
    2. Condensate drains, pans and float switches
    3. Thermostats and controls
    4. The refrigeration cycle, superheat and EPA Section 608
    5. Furnaces, heat pumps, boilers and gas safety
  4. 4.Appliances, Locks & Keys0/5
    1. Refrigerators: moving heat out of the box
    2. Kitchen appliances: ranges, dishwashers, disposals and hoods
    3. Washers and dryers
    4. Reading schematics and testing parts
    5. Locks, keys and lockouts
  5. 5.Interior & Exterior Repair0/5
    1. Drywall repair
    2. Primer, paint and sheen
    3. Texture and caulk
    4. Doors, windows, cabinets and floors
    5. Exterior, ladders and suspect materials
  6. 6.Compliance, Safety & Fair Housing0/4
    1. Chemicals, PPE and sharps
    2. Lockout/tagout, confined spaces and ladders
    3. Fair housing in maintenance work
    4. Lead, asbestos, mold, pests and records
  7. 7.Facilities Operations & Professionalism0/5
    1. Prioritizing service requests and entering homes
    2. Make-ready turns, inspections and curb appeal
    3. Preventive maintenance, repair or replace, and contractors
    4. Pool and spa chemistry and math
    5. Life safety, reporting and records
Saved in this browser. Move it to another device →
← Facilities Operations & Professionalism

Chapter 7 · Lesson 4 of 5

Pool and spa chemistry and math

1 min read

Pool rules, signs and safety devices exist to prevent accidents and to meet local, state and federal requirements. Water testing starts with a good sample taken about elbow deep, away from the return jets and the skimmer, so it represents the water swimmers are in. Free chlorine is the active sanitizer.

Total chlorine minus free chlorine is combined chlorine, chlorine already spent reacting with contaminants. Example: total 2.0 ppm and free 1.4 ppm means 2.0 − 1.4 = 0.6 ppm is combined. The minimum free chlorine and the pH range are set by the local health code or property policy.

ReadingWhat it means or what fixes it
pH above the target rangeAdd an acid such as sodium bisulfate; soda ash and baking soda raise it
Total alkalinityBuffering capacity that keeps pH from swinging
Calcium hardnessDissolved calcium that can form scale

Pool math has two steps. Volume is length × width × average depth × 7.5 gallons per cubic foot: a 40 by 20 ft pool averaging 5 ft holds 40 × 20 × 5 = 4,000 cubic feet, or 30,000 gallons.

For a label rate of 2 lb per 10,000 gallons, that pool needs 3 × 2 = 6 lb, or 6 × 16 = 96 oz.

Common math errors are planted as answer choices: stopping at cubic feet without multiplying by 7.5, multiplying by the depth twice, using the label rate without scaling it to the pool's size, or converting pounds with the 128 fluid ounces in a gallon instead of 16 ounces in a pound.

Check yourself

1. A spa test shows total chlorine at 3.0 ppm and free chlorine at 0.5 ppm. What does the gap between the two readings tell the technician?

2. A pool test shows pH 8.0, and the property's target range is 7.2 to 7.8. Which adjustment moves the pH back into range?

Facts checked 2026-11-15 · Sources: NAAEI: Certificate for Apartment Maintenance Technicians (CAMT), NFPA 10: Standard for Portable Fire Extinguishers

CAMT Apartment Maintenance cheat sheet: every key fact on one page →