Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/32 ▾

0 of 32 lessons finished

Continue: Drywall repair
  1. 1.Electrical Maintenance & Repair0/4
    1. Overloads, short circuits and ground faults
    2. Wiring receptacles, switches and fixtures
    3. Working safely: de-energize, test, then touch
    4. Ohm's law, Watt's law and the multimeter
  2. 2.Plumbing Maintenance & Repair0/4
    1. Supply, distribution and drainage: traps and vents
    2. Shutoffs, leaks and water damage
    3. Toilets, faucets and clearing drains
    4. Water heaters and joining pipe
  3. 3.HVAC Service & When to Refer0/5
    1. Airflow: filters, returns, registers and coils
    2. Condensate drains, pans and float switches
    3. Thermostats and controls
    4. The refrigeration cycle, superheat and EPA Section 608
    5. Furnaces, heat pumps, boilers and gas safety
  4. 4.Appliances, Locks & Keys0/5
    1. Refrigerators: moving heat out of the box
    2. Kitchen appliances: ranges, dishwashers, disposals and hoods
    3. Washers and dryers
    4. Reading schematics and testing parts
    5. Locks, keys and lockouts
  5. 5.Interior & Exterior Repair0/5
    1. Drywall repair
    2. Primer, paint and sheen
    3. Texture and caulk
    4. Doors, windows, cabinets and floors
    5. Exterior, ladders and suspect materials
  6. 6.Compliance, Safety & Fair Housing0/4
    1. Chemicals, PPE and sharps
    2. Lockout/tagout, confined spaces and ladders
    3. Fair housing in maintenance work
    4. Lead, asbestos, mold, pests and records
  7. 7.Facilities Operations & Professionalism0/5
    1. Prioritizing service requests and entering homes
    2. Make-ready turns, inspections and curb appeal
    3. Preventive maintenance, repair or replace, and contractors
    4. Pool and spa chemistry and math
    5. Life safety, reporting and records
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 5 of 7

Interior & Exterior Repair Study Guide — CAMT Apartment Maintenance

26 free practice questions

The interior and exterior questions on the CAMT exam cover the repairs that fill a make-ready: drywall, paint, texture, caulk, doors, windows, cabinets and floors, plus a walk around the outside of the building. Most questions ask for the correct sequence or the right material, and the wrong answers are usually shortcuts that hide a problem instead of fixing it. A few questions also test ladder safety and suspect asbestos.

Key takeaways

  • Drywall repairs use thin coats feathered wider each time, and large holes need wood backing behind the patch.
  • Prime every compound patch, use a stain-blocking sealer on water stains, and repaint the whole wall when a touch-up flashes.
  • Silicone suits wet tub joints but cannot be painted, while siliconized acrylic latex suits trim that will be painted.
  • Fix the cause before the finish: tighten the top hinge, stop the leak before replacing a soft subfloor, and trace roof leaks uphill.
  • Leave suspect popcorn ceiling texture undisturbed and report it for asbestos testing.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1Drywall repair1 min
  2. 2Primer, paint and sheen1 min
  3. 3Texture and caulk1 min
  4. 4Doors, windows, cabinets and floors1 min
  5. 5Exterior, ladders and suspect materials1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: NAAEI: Certificate for Apartment Maintenance Technicians (CAMT), EPA: Protect your family from exposures to asbestos

CAMT Apartment Maintenance cheat sheet: every key fact on one page →Next chapter: Compliance, Safety & Fair Housing →

Practice questions based on the published NAAEI CAMT domains — Essential Trade Skills, Compliance, Facilities Operations, and Professional Development & Collaboration — and on standard trade practice. CAMT and NAAEI are marks of the National Apartment Association; this site is not affiliated with or endorsed by NAA or NAAEI. Code requirements, licensing boundaries and permit rules vary by jurisdiction and revise on a cycle, so none is tested here as a recalled figure — always verify the code having jurisdiction and use a licensed contractor where the work requires one. Confirm current program requirements with NAAEI before testing. About the CAMT credential →