Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/32 ▾
  1. 1.Electrical Maintenance & Repair0/4
    1. Overloads, short circuits and ground faults
    2. Wiring receptacles, switches and fixtures
    3. Working safely: de-energize, test, then touch
    4. Ohm's law, Watt's law and the multimeter
  2. 2.Plumbing Maintenance & Repair0/4
    1. Supply, distribution and drainage: traps and vents
    2. Shutoffs, leaks and water damage
    3. Toilets, faucets and clearing drains
    4. Water heaters and joining pipe
  3. 3.HVAC Service & When to Refer0/5
    1. Airflow: filters, returns, registers and coils
    2. Condensate drains, pans and float switches
    3. Thermostats and controls
    4. The refrigeration cycle, superheat and EPA Section 608
    5. Furnaces, heat pumps, boilers and gas safety
  4. 4.Appliances, Locks & Keys0/5
    1. Refrigerators: moving heat out of the box
    2. Kitchen appliances: ranges, dishwashers, disposals and hoods
    3. Washers and dryers
    4. Reading schematics and testing parts
    5. Locks, keys and lockouts
  5. 5.Interior & Exterior Repair0/5
    1. Drywall repair
    2. Primer, paint and sheen
    3. Texture and caulk
    4. Doors, windows, cabinets and floors
    5. Exterior, ladders and suspect materials
  6. 6.Compliance, Safety & Fair Housing0/4
    1. Chemicals, PPE and sharps
    2. Lockout/tagout, confined spaces and ladders
    3. Fair housing in maintenance work
    4. Lead, asbestos, mold, pests and records
  7. 7.Facilities Operations & Professionalism0/5
    1. Prioritizing service requests and entering homes
    2. Make-ready turns, inspections and curb appeal
    3. Preventive maintenance, repair or replace, and contractors
    4. Pool and spa chemistry and math
    5. Life safety, reporting and records
Saved in this browser. Move it to another device →
← Facilities Operations & Professionalism

Chapter 7 · Lesson 3 of 5

Preventive maintenance, repair or replace, and contractors

1 min read

A preventive maintenance program exists to keep equipment working and extend its service life while reducing downtime and emergencies. Run-to-failure costs more, because breakdowns arrive at the worst moment, at overtime rates, with a resident already inconvenienced.

Tasks are sorted into routine, seasonal and annual work, and the calendar is shaped by the manufacturer's service guidance, the codes that apply, the approved budget and the owner's goals for the property.

Repair-or-replace decisions weigh parts, labor and scheduling against the item's remaining life and the resident's immediate need, with the goal of maximizing net operating income over time. Example: the control board for a range in an occupied home costs much less than a new range but is back-ordered for ten days, while a replacement range is in stock.

Ten days without a way to cook costs goodwill and renewals, so the resident's need is weighed against the savings rather than the lowest invoice winning automatically. Equipment that keeps failing near the end of its life also favors replacement.

  • Call a licensed professional when regulation requires it, when the job is beyond your training or comfort, or when it is simply too large, and verify local rules.
  • Submit a contractor's invoice for payment only after the project checklists are approved and signed; the unsigned checklist is the leverage to get defects corrected.

Check yourself

1. A dishwasher in an occupied home has failed. The repair part costs far less than a new machine but is two weeks out, while a replacement can be installed today. What should decide the call?

2. A maintenance supervisor is deciding which tasks belong on next year's preventive maintenance calendar and how often each one is performed. Which set of inputs should shape that calendar?

Facts checked 2026-11-15 · Sources: NAAEI: Certificate for Apartment Maintenance Technicians (CAMT), NFPA 10: Standard for Portable Fire Extinguishers

CAMT Apartment Maintenance cheat sheet: every key fact on one page →