Chapters0/32 ▾
Study guide · Chapter 2 of 7
Plumbing Maintenance & Repair Study Guide — CAMT Apartment Maintenance
21 free practice questions
The plumbing questions on the CAMT exam describe a symptom, such as a smell, a slow drain, a running toilet or a dripping relief valve, and ask what is causing it or what to do first. Most can be solved by deciding which system the problem lives in and how far it reaches. Plumbing codes differ by jurisdiction, so the exam tests how the systems work rather than code figures.
Key takeaways
- A trap holds a water seal against sewer gas, and the vent lets air in so draining water cannot siphon that seal away.
- Stop a leak at the closest valve first, the fixture stop, then go up to the unit valve and the riser or main only if needed.
- A problem at one fixture lives between that fixture's stop and its outlet, while symptoms at several fixtures point to a shared line.
- A dripping temperature and pressure relief valve is a symptom whose cause must be found, and its discharge is never capped or plugged.
- Clear drains mechanically with a plunger or auger, because chemical openers endanger the next worker and damage older pipe.
Lessons in this chapter
4 short lessons · 4 min read
- 1Supply, distribution and drainage: traps and vents1 min
- 2Shutoffs, leaks and water damage1 min
- 3Toilets, faucets and clearing drains1 min
- 4Water heaters and joining pipe1 min
Facts checked 2026-11-15 · Sources: NAAEI: Certificate for Apartment Maintenance Technicians (CAMT), EPA: Mold and moisture (dry wet materials within 24 to 48 hours)
CAMT Apartment Maintenance cheat sheet: every key fact on one page →Next chapter: HVAC Service & When to Refer →Practice questions based on the published NAAEI CAMT domains — Essential Trade Skills, Compliance, Facilities Operations, and Professional Development & Collaboration — and on standard trade practice. CAMT and NAAEI are marks of the National Apartment Association; this site is not affiliated with or endorsed by NAA or NAAEI. Code requirements, licensing boundaries and permit rules vary by jurisdiction and revise on a cycle, so none is tested here as a recalled figure — always verify the code having jurisdiction and use a licensed contractor where the work requires one. Confirm current program requirements with NAAEI before testing. About the CAMT credential →