Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/32 ▾

0 of 32 lessons finished

Continue: Chemicals, PPE and sharps
  1. 1.Electrical Maintenance & Repair0/4
    1. Overloads, short circuits and ground faults
    2. Wiring receptacles, switches and fixtures
    3. Working safely: de-energize, test, then touch
    4. Ohm's law, Watt's law and the multimeter
  2. 2.Plumbing Maintenance & Repair0/4
    1. Supply, distribution and drainage: traps and vents
    2. Shutoffs, leaks and water damage
    3. Toilets, faucets and clearing drains
    4. Water heaters and joining pipe
  3. 3.HVAC Service & When to Refer0/5
    1. Airflow: filters, returns, registers and coils
    2. Condensate drains, pans and float switches
    3. Thermostats and controls
    4. The refrigeration cycle, superheat and EPA Section 608
    5. Furnaces, heat pumps, boilers and gas safety
  4. 4.Appliances, Locks & Keys0/5
    1. Refrigerators: moving heat out of the box
    2. Kitchen appliances: ranges, dishwashers, disposals and hoods
    3. Washers and dryers
    4. Reading schematics and testing parts
    5. Locks, keys and lockouts
  5. 5.Interior & Exterior Repair0/5
    1. Drywall repair
    2. Primer, paint and sheen
    3. Texture and caulk
    4. Doors, windows, cabinets and floors
    5. Exterior, ladders and suspect materials
  6. 6.Compliance, Safety & Fair Housing0/4
    1. Chemicals, PPE and sharps
    2. Lockout/tagout, confined spaces and ladders
    3. Fair housing in maintenance work
    4. Lead, asbestos, mold, pests and records
  7. 7.Facilities Operations & Professionalism0/5
    1. Prioritizing service requests and entering homes
    2. Make-ready turns, inspections and curb appeal
    3. Preventive maintenance, repair or replace, and contractors
    4. Pool and spa chemistry and math
    5. Life safety, reporting and records
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 6 of 7

Compliance, Safety & Fair Housing Study Guide — CAMT Apartment Maintenance

21 free practice questions

The compliance questions on the CAMT exam cover worker safety, fair housing, environmental hazards and maintenance records. They are written as short scenes, and the right answer is usually the one that stops, protects people and routes the decision to management rather than improvising. The rules here are federal (OSHA, the Fair Housing Act, EPA); states and cities may add stricter ones.

Key takeaways

  • Read the safety data sheet before using an unfamiliar chemical, and never mix cleaners such as bleach and ammonia.
  • Only the worker who applied a lockout lock removes it, and an unventilated vault or pit is treated as a confined space.
  • Fair housing covers maintenance service, so requests are worked in order without regard to who lives in the home.
  • A policy change is a reasonable accommodation, a physical change is a reasonable modification, and staff pass both requests to management.
  • Presume lead paint in pre-1978 housing and treat older floor tile, mastic and popcorn texture as asbestos until tested.

Lessons in this chapter

4 short lessons · 4 min read

  1. 1Chemicals, PPE and sharps1 min
  2. 2Lockout/tagout, confined spaces and ladders1 min
  3. 3Fair housing in maintenance work1 min
  4. 4Lead, asbestos, mold, pests and records1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: OSHA: Hazard Communication, HUD: Fair Housing and Equal Opportunity, EPA: Lead Renovation, Repair and Painting Program

CAMT Apartment Maintenance cheat sheet: every key fact on one page →Next chapter: Facilities Operations & Professionalism →

Practice questions based on the published NAAEI CAMT domains — Essential Trade Skills, Compliance, Facilities Operations, and Professional Development & Collaboration — and on standard trade practice. CAMT and NAAEI are marks of the National Apartment Association; this site is not affiliated with or endorsed by NAA or NAAEI. Code requirements, licensing boundaries and permit rules vary by jurisdiction and revise on a cycle, so none is tested here as a recalled figure — always verify the code having jurisdiction and use a licensed contractor where the work requires one. Confirm current program requirements with NAAEI before testing. About the CAMT credential →