Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/32 ▾
  1. 1.Electrical Maintenance & Repair0/4
    1. Overloads, short circuits and ground faults
    2. Wiring receptacles, switches and fixtures
    3. Working safely: de-energize, test, then touch
    4. Ohm's law, Watt's law and the multimeter
  2. 2.Plumbing Maintenance & Repair0/4
    1. Supply, distribution and drainage: traps and vents
    2. Shutoffs, leaks and water damage
    3. Toilets, faucets and clearing drains
    4. Water heaters and joining pipe
  3. 3.HVAC Service & When to Refer0/5
    1. Airflow: filters, returns, registers and coils
    2. Condensate drains, pans and float switches
    3. Thermostats and controls
    4. The refrigeration cycle, superheat and EPA Section 608
    5. Furnaces, heat pumps, boilers and gas safety
  4. 4.Appliances, Locks & Keys0/5
    1. Refrigerators: moving heat out of the box
    2. Kitchen appliances: ranges, dishwashers, disposals and hoods
    3. Washers and dryers
    4. Reading schematics and testing parts
    5. Locks, keys and lockouts
  5. 5.Interior & Exterior Repair0/5
    1. Drywall repair
    2. Primer, paint and sheen
    3. Texture and caulk
    4. Doors, windows, cabinets and floors
    5. Exterior, ladders and suspect materials
  6. 6.Compliance, Safety & Fair Housing0/4
    1. Chemicals, PPE and sharps
    2. Lockout/tagout, confined spaces and ladders
    3. Fair housing in maintenance work
    4. Lead, asbestos, mold, pests and records
  7. 7.Facilities Operations & Professionalism0/5
    1. Prioritizing service requests and entering homes
    2. Make-ready turns, inspections and curb appeal
    3. Preventive maintenance, repair or replace, and contractors
    4. Pool and spa chemistry and math
    5. Life safety, reporting and records
Saved in this browser. Move it to another device →
← HVAC Service & When to Refer

Chapter 3 · Lesson 3 of 5

Thermostats and controls

1 min read

Many no-cooling and no-heat calls are control problems, not equipment failures, and the exam expects you to check the simple things first. A blank thermostat display means the control has no power, so it cannot send a call for cooling; check its batteries and power supply before calling a contractor.

A thermostat mounted above a lamp or in the path of a supply register reads local heat or cold air instead of the room, which causes short cycling and comfort complaints.

The fan switch is another common call. In ON the blower runs all the time, including the long stretches when cooling is off, so room-temperature air keeps coming out of the vents. In AUTO the blower runs only with a call for cooling or heat. The fix is to explain the setting, switch to AUTO and confirm the system cools.

Example: after a new resident moves in, the office gets a call that air keeps flowing from the bedroom vent even once the room reaches the set temperature.

The technician finds the system on cool and the fan switch on ON. The technician moves the fan to AUTO, waits for a cooling call, feels cold air at a register, and closes the request without calling a contractor.

When a call does go to a contractor, describe the failing function accurately. A unit that blows no air while the outdoor unit runs has a blower problem, the indoor part that pulls air from the return and pushes it through the ducts, not a refrigerant problem.

Check yourself

1. A technician calls a work order in to an HVAC contractor and reports that the unit is not blowing any air at all, although the outdoor unit is running. Which component's job is the technician describing as failing?

2. A resident says the vents blow air all the time but the air is not always cold, and asks the technician to fix the unit. The thermostat fan switch is set to ON. What should the technician do?

Facts checked 2026-11-15 · Sources: NAAEI: Certificate for Apartment Maintenance Technicians (CAMT), EPA: Section 608 of the Clean Air Act (refrigerant management), EPA: Universal waste (mercury-containing equipment)

CAMT Apartment Maintenance cheat sheet: every key fact on one page →