Chapters0/24 ▾
Chapter 4 · Lesson 3 of 4
Voice, radio and horn signals
1 min read
Each series of voice signals has three parts in a fixed order: function and direction, then distance and/or speed, then function stop. The stop is worded function first, as in 'hoist stop'.
Every direction is given from the operator's direction perspective, so 'swing right' means the operator's right even when the signal person faces the cab. When talking a load down blind, call the distance that remains, put the slow-speed word at the end, and keep talking while the load moves.
- Radios are tested on site before work, use a dedicated channel, and give the operator hands-free reception.
- If the radio goes silent mid-motion, the operator stops smoothly and stays stopped until contact is restored and a clear signal is given.
- Audible travel signals under ASME B30.5: one short blast is stop, two is go ahead, three is back up. An emergency audible signal is agreed on for the site.
Example: the right call for a short, slow lowering is 'load down, 10 feet, slow ... 5 feet ... 2 feet ... load stop'. Saying 'slow' first, or calling how far the load has already come down, are the wrong-answer patterns.
Check yourself
1. When voice signals are used to direct a mobile crane, each series of voice signals must contain three elements. In what order must they be given?
2. Mid-swing with a load on the hook, the operator's radio goes silent and the signal person is not in view. What must the operator do?
Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.1419: Signals, general requirements, OSHA 29 CFR 1926 Subpart CC, Appendix A: Standard hand signals, OSHA 29 CFR 1926.1428: Signal person qualifications
Crane Operator (NCCCO) cheat sheet: every key fact on one page →