Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/24 ▾
← Load Charts & Capacity

Chapter 1 · Lesson 2 of 4

Reading between chart rows and what the lines mean

1 min read

Real radii and boom lengths rarely land exactly on a printed row, so manufacturers add operating notes that say what to do. The exam gives you that note in the stem, and the answer always follows it. Chart values are never averaged or interpolated, because capacity does not change in a straight line between rows.

  • Radius between rows: use the next larger radius, which has the lower rating.
  • Boom length between columns: when the note says to take the smaller of the two adjacent ratings, do exactly that, even if the longer boom is rated higher at that radius.
  • Fly and jib charts read by boom angle: use the next lower angle, since a lower angle means a longer radius.

A blank cell means the manufacturer never rated that combination; beyond the no-load stability limit the boom alone can tip the machine, so you change the configuration instead of borrowing a nearby value.

Values above a bold line or marked with an asterisk are limited by structural strength, so the boom or structure can fail before the crane gives any warning by starting to tip.

Values below the line are limited by stability. Under ASME B30.5, stability-based ratings are held to 85 percent of the tipping load on fully extended outriggers and 75 percent on tires or crawlers.

Example: rows of 15,000 lb at 25 ft and 12,200 lb at 30 ft with a measured radius of 27 ft give 12,200 lb, not an average of 13,600 lb.

Check yourself

1. For the boom length in use, the chart lists 15,600 lb at a 30 ft load radius and 12,900 lb at a 35 ft load radius. The measured load radius is 32 ft. A chart note states that for radii not listed, the rating at the next larger radius shall be used. What gross capacity applies?

2. For the boom length and radius the operator wants to use, the rated capacity chart shows no value at all - the cell is blank. What does a blank cell mean?

Facts checked 2026-11-15 · Sources: NCCCO: Mobile Crane Operator certification overview and exam outlines, OSHA 29 CFR 1926.1417: Operation (cranes and derricks in construction)

Crane Operator (NCCCO) cheat sheet: every key fact on one page →