Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/24 ▾
← Back

Study guide · Chapter 1 of 6

Load Charts & Capacity Study Guide — Crane Operator (NCCCO)

21 free practice questions

Load chart questions on the NCCCO mobile crane exam are arithmetic plus judgment: the stem gives you a chart line, a configuration and a list of deductions, and you must find the number that is actually allowed. This chapter covers gross versus net capacity, how to read values that fall between chart rows, what radius really means, and the rope and duty-cycle limits that sit beside the chart. On the job the chart for the machine in front of you always governs, never a practice question.

Key takeaways

  • Chart ratings are gross, so every load-handling device hanging on the crane, used or not, is subtracted to get net capacity.
  • Never average or interpolate chart values; follow the chart note, which always points to the more conservative row or column.
  • The measured loaded radius governs capacity, and it grows as the boom deflects under load.
  • A chart is valid only for the exact configuration it names: outrigger position, counterweight, boom mode and attachments.
  • Chart capacity and rope capacity are separate limits, and the smaller one always controls.

Lessons in this chapter

4 short lessons · 4 min read

  1. 1Gross capacity, deductions and net capacity1 min
  2. 2Reading between chart rows and what the lines mean1 min
  3. 3Load radius, deflection and the configuration the chart assumes1 min
  4. 4Parts of line, rope limits and duty-cycle work1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: NCCCO: Mobile Crane Operator certification overview and exam outlines, OSHA 29 CFR 1926.1417: Operation (cranes and derricks in construction)

Crane Operator (NCCCO) cheat sheet: every key fact on one page →Next chapter: Rigging & Load Handling →

Practice questions based on the published NCCCO mobile crane operator exam outlines and the consensus safety practices the trade runs on. CCO and NCCCO are marks of the National Commission for the Certification of Crane Operators; this site is not affiliated with or endorsed by NCCCO. Capacity always comes from the load chart for the machine and configuration in front of you, and wind, ground-bearing and permit limits are set by the manufacturer's manual and the authority having jurisdiction — never from a practice question. Confirm current exam requirements before testing. About CCO certification →