Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/24 ▾
← Signals & Communication

Chapter 4 · Lesson 2 of 4

Hand signals for boom, load, swing and travel

1 min read

Most motion signals use one arm extended with a hand shape that names the function. The ones the exam likes are the combinations and the selectors, because each has a detail that is easy to reverse.

  • Thumb down with fingers opening and closing: boom down and raise the load. Thumb up with fingers opening and closing: boom up and lower the load. The thumb sets the boom, and the load moves the opposite way.
  • Swing: the arm points with the index finger in the direction the boom is to swing.
  • Tap the top of the head to select the main hoist; tap the elbow of a vertical forearm to select the whip (auxiliary) line. Each is followed by the regular action signal.
  • One-hand telescoping, from the ASME chart: thumb tapping the chest means telescope out; heel of the fist tapping the chest, thumb pointing outward, means telescope in.
  • Crawler one-track travel: the raised fist marks the track to lock, and the rotating fist shows which track moves and which way.
  • Crawler travel on both tracks: the fists rotate around each other in front of the body; rotating away from the body means travel forward, and toward the body means travel backward.

Check yourself

1. A signal person extends one arm horizontally to the side with the thumb pointing DOWN while the other fingers repeatedly open and close. What is being commanded?

2. On a crawler crane the signal person raises the fist on the left side and rotates the right fist in front of the body. What does this signal mean?

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.1419: Signals, general requirements, OSHA 29 CFR 1926 Subpart CC, Appendix A: Standard hand signals, OSHA 29 CFR 1926.1428: Signal person qualifications

Crane Operator (NCCCO) cheat sheet: every key fact on one page →