Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/24 ▾
← Operations & Operational Aids

Chapter 5 · Lesson 2 of 4

Two-blocking and the anti two-block system

1 min read

Two-blocking is contact between the load block, hook or overhaul ball and the boom tip. It can part the hoist rope and drop the load. It does not require hoisting.

Telescoping the boom out moves the tip away from the drum and draws rope out of the hanging line, so the block rises toward the tip; booming can close the same gap. That is why the temporary measure for a failed device on a telescopic crane includes watching the block while the boom is extended.

  • A warning device only alerts the operator; a prevention device automatically stops the function that would cause contact.
  • Hoisting personnel requires a functioning automatic prevention device, not just a warning.
  • Extra parts of line and the load moment indicator do nothing to stop two-blocking.

When the alarm sounds, the first step is to stop the function that is closing the gap. Then restore clearance by reversing the cause, for example paying out load line or retracting the boom. Example: the alarm sounds while telescoping out; the operator stops telescoping, lowers the hook a few feet, and only then decides how to finish the extension.

Check yourself

1. The hoist drum is not turning and the load hangs stationary below the boom tip. Which operator action can still bring the load block up against the boom tip?

2. What distinguishes an anti two-block warning device from an anti two-block prevention device, and which is required when hoisting personnel?

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.1416: Operational aids, OSHA 29 CFR 1926.1431: Hoisting personnel, OSHA 29 CFR 1926.1417: Operation

Crane Operator (NCCCO) cheat sheet: every key fact on one page →