Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/24 ▾
← Signals & Communication

Chapter 4 · Lesson 1 of 4

Stop, emergency stop and dog everything

1 min read

Three signals end crane motion, and the exam tests whether you can tell them apart. They look similar on paper, so focus on the one detail that separates each pair.

SignalHow it is givenWhat it means
StopOne arm extended to the side, palm down, swung back and forthEnd the function that is moving
Emergency stopBoth arms extended, palms down, swung back and forthHalt all crane motion at once
Dog everythingBoth hands clasped together at waist levelSuspend operations and hold everything as it is

The number of arms is the only difference between stop and emergency stop. Dog everything is not a stronger stop; it is a pause in the whole operation, and in voice signalling it stands alone with no matching terminate command.

Authority to stop is universal. Only the designated signal person directs the load, but anyone who becomes aware of a safety problem may give a stop or emergency stop, and the operator must obey it whoever gives it. Example: a laborer who is not on the lift crew sees a sling slipping and swings one arm palm down.

The operator stops the function, even though the laborer is not the signal person.

Check yourself

1. A worker on the ground extends BOTH arms horizontally to the side, palms down, and swings both arms back and forth. What is this standard hand signal telling the mobile crane operator?

2. A signal person holds both hands together at waist level. What does this signal mean, and how does it differ from stop?

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.1419: Signals, general requirements, OSHA 29 CFR 1926 Subpart CC, Appendix A: Standard hand signals, OSHA 29 CFR 1926.1428: Signal person qualifications

Crane Operator (NCCCO) cheat sheet: every key fact on one page →