Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/24 ▾
← Back

Study guide · Chapter 2 of 6

Rigging & Load Handling Study Guide — Crane Operator (NCCCO)

22 free practice questions

Rigging questions test whether the weight reaching each sling, shackle and hook is really within its rating. Most of them turn on four ideas: sling angle, hitch type, the load's weight and center of gravity, and the condition of the hardware. The numbers here follow ASME B30.9 and OSHA 1926.251, but the tag on the sling and the manufacturer's data always govern the real lift.

Key takeaways

  • Sling angle is measured from the horizontal, and leg tension rises steeply as that angle gets smaller.
  • A choker is rated at roughly 75 to 80 percent of vertical, while a vertical-leg basket is rated at twice vertical.
  • Load weight is verified from papers, markings, drawings or calculation, and if it cannot be confirmed the lift does not happen.
  • The pick point closer to the center of gravity carries the larger share of the weight.
  • A sling with a missing tag, a birdcage, a kink or a cut is removed from service, never derated in the field.

Lessons in this chapter

4 short lessons · 4 min read

  1. 1Sling angles and leg tension1 min
  2. 2Vertical, choker and basket hitches1 min
  3. 3Load weight and center of gravity1 min
  4. 4Hardware, sling inspection and taglines1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.251: Rigging equipment for material handling, NCCCO: Mobile Crane Operator certification overview and exam outlines

Crane Operator (NCCCO) cheat sheet: every key fact on one page →Next chapter: Site Assessment & Setup →

Practice questions based on the published NCCCO mobile crane operator exam outlines and the consensus safety practices the trade runs on. CCO and NCCCO are marks of the National Commission for the Certification of Crane Operators; this site is not affiliated with or endorsed by NCCCO. Capacity always comes from the load chart for the machine and configuration in front of you, and wind, ground-bearing and permit limits are set by the manufacturer's manual and the authority having jurisdiction — never from a practice question. Confirm current exam requirements before testing. About CCO certification →