Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/24 ▾
← Inspections & Safety Requirements

Chapter 6 · Lesson 4 of 4

Stop authority, swing areas and operator authorization

1 min read

Three people rules round out this pool. First, anyone who becomes aware of a safety problem may give a stop signal, and the operator must obey it; signals that move the load still come only from the designated signal person.

Second, under OSHA 1926.1424, where the rotating superstructure could strike or pinch someone, the employer marks the swing area with control lines, warning lines or barriers, or with warning signs and high-visibility markings where barriers are infeasible.

A worker who must enter that area out of the operator's view tells the operator first through a prearranged system, and the operator does not rotate until told the worker is safe. High-visibility clothing or an empty hook does not change that.

Third, certification, machine-specific qualification and employer authorization are separate. A current certification shows tested knowledge and skill for a category of crane. The employer must still evaluate the operator on the particular machine, in the configurations and tasks assigned, and then authorize that operator, because controls, charts and operational aids differ from one machine to the next.

Example: an operator certified for telescopic boom cranes who moves to a different make on a new site is evaluated on that crane before running it, without needing a new certification for each machine.

Check yourself

1. A crane operator holds a current certification for the type and capacity of crane at the site. Is the operator therefore cleared to run that specific machine?

2. An employee must enter an area behind a mobile crane that is out of view of the operator while the crane is set up for work. What does the OSHA construction crane standard require?

Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1926.1412: Inspections, OSHA 29 CFR 1926.1413: Wire rope, inspection, OSHA 29 CFR 1926.1415: Safety devices

Crane Operator (NCCCO) cheat sheet: every key fact on one page →