Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Structure & Foundation0/5
    1. Footings, soil movement and foundation crack patterns
    2. Water below grade and in crawl spaces
    3. Load path, columns and floor framing
    4. Roof framing: rafters, ridges and trusses
    5. Decay and wood-destroying organisms
  2. 2.Roofing, Exterior & Site0/5
    1. Roof coverings: how they keep water out and how they fail
    2. Flashings and roof penetrations
    3. Roof drainage, ice dams and chimney tops
    4. Walls, cladding and windows as drained assemblies
    5. Decks, grading and retaining walls
  3. 3.Electrical Systems0/5
    1. Service entrance and capacity
    2. Grounding, bonding and the neutral
    3. Inside the panel: overcurrent protection and terminations
    4. Ground-fault, arc-fault and receptacle testing
    5. Older wiring, workmanship defects and generators
  4. 4.Plumbing Systems0/4
    1. Water supply and piping materials
    2. Traps, vents and drain defects
    3. Water heaters, relief valves and gas connections
    4. Cross-connections, backflow and fixture leaks
  5. 5.HVAC, Insulation & Ventilation0/5
    1. Furnace combustion safety
    2. Venting, draft and house depressurization
    3. Boilers, heat pumps and air conditioning
    4. Insulation, air barriers and vapor retarders
    5. Attic ventilation, crawl spaces and exhaust ducts
  6. 6.Standards, Ethics & Reporting0/5
    1. What a home inspection is and is not
    2. Material defects and how to classify findings
    3. Writing the report: methods, limits and wording
    4. Exclusions, environmental hazards and immediate dangers
    5. Agreements, confidentiality and conflicts of interest
Saved in this browser. Move it to another device →
← Standards, Ethics & Reporting

Chapter 6 · Lesson 1 of 5

What a home inspection is and is not

1 min read

Across the published standards of practice, a general home inspection has four limits. It is visual and non-invasive. It covers only readily accessible installed systems and components. It is a snapshot of conditions on the day of the inspection. And it is not technically exhaustive.

Because of those limits it is also not a code-compliance inspection and not a warranty. If a client asks whether a 20-year-old deck meets code, the inspector explains that the inspection is not a code ruling and still inspects and describes the deck, including any safety concerns.

Readily accessible means the inspector can see the item without moving personal property, dismantling anything, or taking destructive or unsafe steps. It does not mean anything that could be exposed with hand tools. The standards are minimums: an inspector with the right qualification may offer an excluded service, must do it competently, and should document it in the agreement.

Licensing is not uniform. Some states license home inspectors and use the NHIE as their exam, others set their own requirements, and some do not license inspectors at all. Check the rules where you plan to work.

Check yourself

1. Which statement best defines a general home inspection?

2. An inspector holds a separate qualification in a service that the standards of practice exclude from a general home inspection and wishes to offer it to the same client. Which statement is correct?

Facts checked 2026-11-15 · Sources: InterNACHI Home Inspection Standards of Practice, InterNACHI Code of Ethics for Home Inspectors, ASHI Standard of Practice for Home Inspection, EPA: Health Risk of Radon, EPA: Protect Your Family from Sources of Lead

Home Inspector Practice Test (NHIE) cheat sheet: every key fact on one page →