Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Structure & Foundation0/5
    1. Footings, soil movement and foundation crack patterns
    2. Water below grade and in crawl spaces
    3. Load path, columns and floor framing
    4. Roof framing: rafters, ridges and trusses
    5. Decay and wood-destroying organisms
  2. 2.Roofing, Exterior & Site0/5
    1. Roof coverings: how they keep water out and how they fail
    2. Flashings and roof penetrations
    3. Roof drainage, ice dams and chimney tops
    4. Walls, cladding and windows as drained assemblies
    5. Decks, grading and retaining walls
  3. 3.Electrical Systems0/5
    1. Service entrance and capacity
    2. Grounding, bonding and the neutral
    3. Inside the panel: overcurrent protection and terminations
    4. Ground-fault, arc-fault and receptacle testing
    5. Older wiring, workmanship defects and generators
  4. 4.Plumbing Systems0/4
    1. Water supply and piping materials
    2. Traps, vents and drain defects
    3. Water heaters, relief valves and gas connections
    4. Cross-connections, backflow and fixture leaks
  5. 5.HVAC, Insulation & Ventilation0/5
    1. Furnace combustion safety
    2. Venting, draft and house depressurization
    3. Boilers, heat pumps and air conditioning
    4. Insulation, air barriers and vapor retarders
    5. Attic ventilation, crawl spaces and exhaust ducts
  6. 6.Standards, Ethics & Reporting0/5
    1. What a home inspection is and is not
    2. Material defects and how to classify findings
    3. Writing the report: methods, limits and wording
    4. Exclusions, environmental hazards and immediate dangers
    5. Agreements, confidentiality and conflicts of interest
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 3 of 7

Electrical Systems Study Guide — Home Inspector Practice Test (NHIE)

33 free practice questions

Electrical questions on the NHIE test whether you understand why a rule exists, not which code section states it. Each scene describes a service, a panel, a receptacle or old wiring, and the right answer names the mechanism of harm and reports it to a qualified licensed electrician. The inspector never repairs, never loads breakers to test them, and stops when opening equipment would be unsafe.

Key takeaways

  • Service capacity is set by the lowest-rated component in the chain, and a home inspection does not include a load calculation.
  • Neutral and ground are bonded at the service disconnect only, so a bonded subpanel puts working current on metal parts.
  • A breaker protects the wire, not the appliance, except where listed air-conditioning equipment is protected according to its nameplate.
  • Ground-fault protection protects people from shock and arc-fault protection reduces fire risk, so neither replaces the other.
  • A portable generator cord-connected to a branch circuit with no transfer equipment can backfeed and kill line workers.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1Service entrance and capacity1 min
  2. 2Grounding, bonding and the neutral1 min
  3. 3Inside the panel: overcurrent protection and terminations1 min
  4. 4Ground-fault, arc-fault and receptacle testing1 min
  5. 5Older wiring, workmanship defects and generators1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: National Home Inspector Examination (EBPHI), InterNACHI Home Inspection Standards of Practice

Home Inspector Practice Test (NHIE) cheat sheet: every key fact on one page →Next chapter: Plumbing Systems →

Practice questions based on the National Home Inspector Examination content outline, widely shared home inspection standards of practice, and residential building science. Not affiliated with or endorsed by any examination board, licensing authority, or inspector association. A home inspection is a visual, non-invasive examination and is not a code-compliance inspection — nothing here should be read as a code requirement. Home inspection is regulated differently from place to place; confirm your own jurisdiction's requirements and the standards of practice you are held to before testing or inspecting. About the National Home Inspector Examination →