Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/23 ▾
  1. 1.Regulations, Records & Publications0/5
    1. What an A&P mechanic may do and approve
    2. Major or minor work, approved data and FAA Form 337
    3. Writing maintenance and inspection record entries
    4. Keeping records, AD status and inspection timing
    5. Keeping your mechanic certificate usable
  2. 2.Basic Electricity0/5
    1. Ohm's law, power and what sets a wire's resistance
    2. Series, parallel and series-parallel circuits
    3. Wire ratings, circuit protection and test meters
    4. Aircraft batteries and DC motors
    5. Alternating current, transformers and diodes
  3. 3.Weight & Balance, Math & Physics0/4
    1. Weight and balance terms: datum, empty weight, useful load and MAC
    2. Finding and correcting the center of gravity
    3. Shop mathematics: order of operations, areas, volumes and ratios
    4. Physics for aviation: power, levers, fluids, gases and stress
  4. 4.Materials, Hardware & Drawings0/4
    1. Reading aircraft drawings: lines, sections, tolerances and diagrams
    2. Fluid lines: flares, flareless fittings and flexible hose
    3. Corrosion: how it starts, the forms it takes and how to find it
    4. Aluminum alloys, rivets, bolts, nuts, torque and safety wire
  5. 5.Ground Operation, Servicing & Human Factors0/5
    1. Fire protection on the ramp and during engine starts
    2. Fueling, oxygen servicing and turbine engine starts
    3. Towing, taxi light signals and propeller safety
    4. Inspections and nondestructive testing methods
    5. Human factors: the Dirty Dozen and safety nets
Saved in this browser. Move it to another device →
← Weight & Balance, Math & Physics

Chapter 3 · Lesson 2 of 4

Finding and correcting the center of gravity

1 min read

Every CG problem uses moment = weight × arm and CG = total moment / total weight. When the aircraft is weighed, anything on a scale that is not part of the airplane, such as chocks, is tare and is subtracted first.

Example: nose scale 410 lb with 10 lb tare at +30.0 in, and each main scale 800 lb at +90.0 in. Net nose weight is 400 lb, moments are 12,000 and 144,000 in-lb, and the empty-weight CG is 156,000 / 2,000 = +78.0 in.

  • Shifting weight: weight to move = total weight × CG change / distance moved. Example: a 2,800 lb airplane is 0.6 in aft of its limit; moving baggage from +90 to +20 (70 in) needs 2,800 × 0.6 / 70 = 24 lb.
  • Adding ballast: ballast = loaded weight × distance out of limits / distance from ballast arm to the limit. Example: 2,500 lb with CG at +15.0, forward limit +16.0, ballast at +116.0 needs 2,500 × 1.0 / 100 = 25 lb. Check: 40,400 / 2,525 = +16.0.
  • Adverse-loading minimum fuel for a piston engine: METO horsepower / 2, in pounds. Example: 180 METO hp gives 90 lb, which is 15 gallons. Turbine aircraft use the manufacturer's figure.

Check yourself

1. An airplane is leveled and weighed on three scales. The nosewheel scale reads 315 lb, which includes 15 lb of tare from a chock; the nosewheel arm is +20.0 in. The left main reads 852 lb and the right main reads 848 lb with no tare, both at an arm of +80.0 in. What is the empty-weight CG?

2. An aircraft weighs 6,400 lb with its CG at station +78.0. The aft CG limit is +76.5. How much cargo must be moved from station +150.0 to station +30.0 to bring the CG exactly to the aft limit?

Facts checked 2026-11-15 · Sources: FAA-S-ACS-1 Aviation Mechanic Airman Certification Standards, FAA Aircraft Handbooks and Manuals (FAA-H-8083-30B AMT Handbook General; FAA-H-8083-1 Weight and Balance Handbook)

FAA A&P Mechanic (General) cheat sheet: every key fact on one page →