Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/23 ▾
← Regulations, Records & Publications

Chapter 1 · Lesson 2 of 5

Major or minor work, approved data and FAA Form 337

1 min read

Part 1 defines a major repair by its consequence, not by labor hours or the kind of part. A repair is major if, done improperly, it might appreciably affect weight, balance, structural strength, performance, powerplant operation, flight characteristics or other qualities affecting airworthiness, or if it is not done according to accepted practices or cannot be done by elementary operations.

Appendix A of part 43 lists examples that settle borderline cases, and anything that is not major is minor.

Data typeExamplesEnough for
Acceptable dataMaintenance manual, instructions for continued airworthinessMinor repairs and alterations
Approved dataTCDS, STC, AD, field approval on Form 337Major repairs and alterations

Under 43.13(a), if the manual calls for a special tool, you use that tool or equipment the Administrator accepts as equivalent. For a major repair or alteration, appendix B requires FAA Form 337 at least in duplicate: a signed copy to the owner and one to the FAA within 48 hours after approval for return to service.

An extended-range fuel tank inside the passenger or baggage compartment needs a third copy carried aboard the aircraft. Example: a repair approved on a Monday at 10:00 must have its FAA copy on its way by Wednesday at 10:00.

Check yourself

1. A mechanic completes a major repair to an airframe. Under part 43 appendix B, how must FAA Form 337 be executed and disposed of?

2. Under 14 CFR part 1 and part 43, what makes a repair a major repair?

Facts checked 2026-11-15 · Sources: FAA-S-ACS-1 Aviation Mechanic Airman Certification Standards, 14 CFR Part 43: Maintenance, Preventive Maintenance, Rebuilding, and Alteration, 14 CFR Part 65: Certification: Airmen Other Than Flight Crewmembers

FAA A&P Mechanic (General) cheat sheet: every key fact on one page →